MODULAR ARMORED TACTICAL COMBAT HOUSE - Action Target

porTAble TrAps ConTInued
Another misconception is that if you put an
additional band of steel in the wall you don’t
need bullet traps. This is essentially like saying
if you put bigger tires on your car you don’t
need windshield wipers. The one has nothing to
do with the other. More steel in the wall does
create a thicker barrier, but that doesn’t change
the fact that servicing portable bullet traps is
still significantly less expensive than servicing
the walls themselves. It is important to remember
that MATCH does not need bullet traps at all to
safely and consistently stop bullets. From top
to bottom, MATCH is 100% balistically secure.
The only issue here is one of maintenance and
life cycle costs.
p beCAuse THe use of porTAble bulleT TrAps CAn reduCe
MAInTenAnCe CosTs by AT leAsT 75%, THe InvesT-
MenT Is A wIse deCIsIon.
To function safely and effectively, portable
bullet traps must not only have an armor steel
back, but armor steel around all 4 sides as well.
Designs that do not incorporate steel sides
should be strictly avoided as bullet splatter
eating through wooden sides creates an obvious
hazard. All Action Target portable bullet traps
have steel sides and are made of throughhardened
500 Brinell steel for maximum safety
and durability.
p If 70 To 80 perCenT of THe rounds Are CApTured In
THe TrAp, THe reMAInder wIll be wIdely dIspersed
And CAuse lITTle weAr.
888.377.8033 39