Appendix 1 Page 1 TECHNICAL SPECIFICATIONS FORM SUPPLY ...

TECHNICAL SPECIFICATIONS FORM 

SUPPLY OF TOYOTA LAND CRUISER V8 DIESEL OR EQUIVALENT 

PROPOSED VEHICLE (indicate year make/model): 

Appendix 1 Page 1 

Make: _____________________________ Country of Origin: __________________________ 

Model: (year of manufacture and vehicle model’s details)_____________________________ 

BIDDERS ARE ENCOURAGED TO QUOTE FOR BETTER OR IMPROVED SPECIFICATIONS 

ITEM MINIMUM 

SPECIFICATIONS 

A Mandatory Specifications 

1 Base Vehicle Engine 

Specifications 

Displacement (cc) : 4461 

Engine: Diesel 

Number of Cylinders: 8 in V line 

Valve Mechanism: 32 Valve DOHC 

Maximum Torque (Nm/lbft): 650/479 

Engine speed for max torque 1600-2800 

(rpm): 

Max output (kW/DIN hp): 210/286 

Engine speed for max output 

(rpm): 

3600 

Transmission: Automatic, six speed 

Fuel Tank (liters): 93 

Driven Wheels 4–selectable 

Driving Hand Right Hand Drive 

Body Style 4 x 4 

2 Armoring—Overall 

Requirements 

Required Protection Level— 

360 o Round the Vehicle 

including front, rear, sides, 

roof and floor 

Securing of all Armor all 

Materials 

CEN Level B6 and/or NIJ Level 

III Ballistic protection 

Bolting or bonding, ensuring 

structural integrity and 

protection of the passenger 

BIDDER’S RESPONSE 

Please provide 

specifications in ALL rows. 

Empty rows will be 

considered negative 

responses. Empty rows in 

the case of Mandatory 

Specifications” could lead 

to disqualification of bids

ITEM MINIMUM 


Seams, joints, gaps, or holes 

occurring at door openings, 

with armor panels, between 

opaque and transparent 

armor boundaries. 

Gaps between opaque 

armor mating surfaces; 

opaque to transparent armor 

transition at front side; rear 

of passenger or cargo 

compartment; and along all 

passenger compartment 

door lines. 

Joining of all opaque armor 

materials on the same plane 

compartment 

Shall be constructed in a 

manner that a projectile 

following a linear or angled path 

shall not enter the vehicle’s 

interior without contacting the 

armor material. Construction 

shall also minimize a projectile 

entering the interior due to a 

ricochet from the armor 

No gaps shall be permitted 

All joining shall be overlapped 

3 Other Mandatory Opaque 

Armor Requirements 

Floor armor T0 CEN Level B6 and/or NIJ 

Level III with 9 additional layers 

of para-aramid synthetic fiber 

Armor of All 

Doors/Pillars/Sides/Window 

Frames 

(Kevlar or equivalent) 

To meet CEN Level B6 and/or 

NIJ Level III 

4 Mandatory Transparent 

Armor (Windows) 

Requirements 

Transparent Armor To meet CEN Level B6 and/or 

NIJ Level III 

Construction of Transparent One-piece construction with 

Armor 

Material for Transparent 

Armor 

5 Mandatory Up Gradations 

and Reinforcements 

anti-spall inner layer 

PPG, Isoclima, Triplex or Sully, 

of glass-plastic (polycarbonate), 

laminated construction 











ITEM MINIMUM 


Modification and Upgrade of 

suspension system, 

attachment points and 

related infrastructure 

components to meet after 

armoring mass of vehicle 

Brake system Upgrade shall 

accommodate after-armoring 

mass of vehicle and be of 

such design as to ensure 

against 

excessive brake fade and/or 

failure at high speed 

Specific vehicle acceleration, 

braking and cornering at 

after armoring mass weight 

on dry surface 

A minimum of 25% upgrade 

Upgrade shall accommodate 

after-armoring mass of vehicle 

and be of such design as to 

ensure against excessive brake 

fade and/or failure at high 

speed (Bidders to provide full 

details and high speed range) 

Should allow for positive 

controls at all times. 

Performance degradation over 

unarmored comparably 

equipped make, series, model 

should not exceed 15% in 

braking distance 

Door pillars and hinges Reinforced for maximum 

strength retention 

Driver’s side window 

Operation 

Radiator and Fuel Tank 

Protection 

Run flat tire inserts 

Operable. One-piece 

transparent armor shall be 

constructed such that the 

window can be manually and 

hydraulically or electronically 

moved up and down. Window 

may open only up to a 

maximum of six inches. All 

other windows will not have any 

opening mechanism. 

To meet CEN Level B6 and/or 

NIJ Level III 

Standard type or tire/wheel 

combination on all five (5) 

wheels (including spare wheel) 

to allow vehicle to travel at high 

speed after tire puncture 











ITEM MINIMUM 


Rims for all 5 wheels Preferably alloy wheels. The 

rims must have capacity to 

meet or exceed load imposed 

on each wheel (armor mass 

and full passenger load) 

6 Mandatory Certification 

Requirements 

Opaque and transparent 

armor material to be used 

under this contract 

Tested by an armor test 

laboratories (e.g. H.P. White, 

USA, or Beschussamt, 

Mellrichstadt, Germany) with 

certifications as having met the 


III standards. Bidders to 

provide complete details of the 

testing laboratory including the 

accreditation details of the 

laboratory with this bid 

Certification Requirements Original certifications (or 

certified to be original) for 

opaque and transparent 

material including fuel tank, 

radiator and run flat system 

tested and used under this bid 

Armor material substitution No armor material substitution 

is authorized unless tested and 

certified. 

Opaque armor material Must be pre-certified to meet 


III standards and material 

should be traceable by batch 

number and manufacturing 

Timing of submission of all 

certification 

7 Other Mandatory 

date 

Either with the bid or the latest 

before fabrication of armor 

materials. Complete details of 

the testing laboratory including 

the accreditation details of the 

laboratory to be provided with 

the bid 











ITEM MINIMUM 


Requirements 

Source / Origin Must meet ADB’s eligibility 

requirement. Refer to para 14 

of the RFQ (Instructions to 

Delivery Period 

8 Mandatory Warranty 

Requirements 

All workmanship 

Bidders) 

Maximum 12 weeks after 

receipt of purchase order 

Five (5) years 

All opaque armor Five (5) years 

All transparent armor Three (3) years 

All upgrades, primarily Three (3) years 

braking system, suspension 

etc 

Special equipment such as Three (3) years 

operable window system, 

protected fuel tank, radiator, 

run flats, etc 

9 Mandatory Accessories 

Tool kit Standard OEM 

On all four driver/passenger 

Deadbolts 

compartment doors 

Side mirrors Factory OEM 

Floor Mats Factory OEM 

Hydraulic Jack Suitable type which has 

capacity to lift the armored 

vehicle 

B Optional Features 

(Accessories/Comfort etc.) 

Please list all 

ADB prefers that all features 

accessories/optional which come as standard with 

features. 

the base model are retained 

(attach separate sheet if 

needed) 











ITEM MINIMUM 











to disqualification of bids 

It is hereby certified that in case of award of contract to us, the armor materials to be used for 

the two armored vehicles will fully meet the criteria and specifications provided by us in 

Appendix 1 of our bid. We also certify that all mandatory certification requirements will be fully 

met in accordance with the requirements of this bid. 

Yours truly, 

_____________________________________ 

(Name and Signature of Authorized Officer) 

_____________________________________ 

(Designation/Position Title in the Company) 

_____________________________________ 

(Name of Bidder/Company) 

_____________________________________ 

(Business Address) 

_____________________________________ 

(Telephone Number/Facsimile Number)

Appendix 1 Page 1 TECHNICAL SPECIFICATIONS FORM SUPPLY ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?