UniBasic Commands Reference - Rocket Software

More documents

Recommendations

Info

INPUTTRAP Syntax INPUTTRAP string.expr GOSUB label [:] [,label [:]] INPUTTRAP string.expr GOTO label [:] [,label [:]] Description The UniBasic INPUTTRAP command sets a trap for a particular character or characters in a program. INPUTTRAP enables you to specify characters which, if entered at an INPUT or INPUT @ statement, will branch to another statement label. Parameters The following table describes each parameter of the syntax. Parameter Description 1-395 UniBasic Commands Reference string.expr Specifies the user input upon which to branch to another statement label. To set a trap for both uppercase and lowercase characters, use the following pattern INPUTTRAP ‘Xx’, as in the following: INPUTTRAP ‘Aa’ GOSUB 10,10. GOSUB GOTO These keywords direct program execution to execute or branch to a specified label in the program. GOSUB ensures that program execution returns to the statement below the subroutine call. GOTO is a branch only, and does not return processing to the calling routine. These keywords operate just like the commands of the same names. For more information about the GOTO and GOSUB commands, see their entries in this manual. label Specifies the label to which to branch. INPUTTRP Parameters
Example In the following example, the program statement performs a GOSUB to label ASUB if the user enters H or to label BSUB if the user enters B: INPUTTRAP 'HB' GOSUB ASUB,BSUB INPUT@ (10,10) VALUE Related Commands UniBasic IN, INPUT, INPUT @, INPUTERR INPUTTRAP 1-396
Page 1 and 2:
C:\Program Files\Adobe\FrameMaker8\
Page 3 and 4:
The above trademarks are property o
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
TRIMB . . . . . . . . . . . . . . .
Page 17 and 18:
UniBasic Commands and Functions Thi
Page 19 and 20:
! ! is a synonym for the * and REM
Page 21 and 22:
#< #< is a synonym for the GE relat
Page 23 and 24:
$BASICTYPE Syntax $BASICTYPE "param
Page 25 and 26:
$DEFINE Syntax $DEFINE var Descript
Page 27 and 28:
In the next example, when you compi
Page 29 and 30:
Example In the following example, t
Page 31 and 32:
Parameters The following table desc
Page 33 and 34:
$UNDEFINE Syntax $UNDEFINE var Desc
Page 35 and 36:
* Syntax expr * expr Synonyms !, RE
Page 37 and 38:
*= Syntax var *= expr Description T
Page 39 and 40:
+= Syntax var += expr Description T
Page 41 and 42:
-= Syntax var -= expr Description T
Page 43 and 44:
= Syntax var /= expr Description Th
Page 45 and 46:
^ Syntax expr1^expr2 Synonym ** Des
Page 47:
< is a synonym for the LT (less tha
Page 50 and 51:
= 1-55 UniBasic Commands Reference
Page 52 and 53:
=< 1-57 UniBasic Commands Reference
Page 54 and 55:
1-59 UniBasic Commands Reference >
Page 56 and 57:
@ Syntax @(col.expr [,row.expr]) @(
Page 58 and 59:
1-63 UniBasic Commands Reference Op
Page 60 and 61:
Examples In the following example,
Page 62 and 63:
[] Syntax 1-67 UniBasic Commands Re
Page 64 and 65:
{} {} is a synonym for the CALCULAT
Page 66 and 67:
Note: You can use the ECL ON.ABORT
Page 68 and 69:
ABS Syntax ABS(expr) Description Th
Page 70 and 71:
Parameter Description 1-76 UniBasic
Page 72 and 73:
ACTIVATEKEY Syntax ACTIVATEKEY , [
Page 74 and 75:
STATUS Code Example 1-80 UniBasic C
Page 76 and 77:
Parameters 1-82 UniBasic Commands R
Page 78 and 79:
Parameter Description format 1 - PE
Page 80 and 81:
1-86 UniBasic Commands Reference Re
Page 82 and 83:
amInitialize Syntax 1-88 UniBasic C
Page 84 and 85:
amReceiveMsg Syntax amReceiveMsg(hS
Page 86 and 87:
amReceiveRequest Syntax amReceiveRe
Page 88 and 89:
amSendMsg Syntax 1-94 UniBasic Comm
Page 90 and 91:
amSendRequest Syntax amSendRequest(
Page 92 and 93:
amSendResponse Syntax amSendRespons
Page 94 and 95:
amTerminate Syntax amTerminate(hSes
Page 96 and 97:
analyzeCertificate Syntax analyzeCe
Page 98 and 99:
AND Syntax expr1 AND expr2 Synonym
Page 100 and 101:
ASIN Syntax ASIN(expr) Description
Page 102 and 103:
Related Command UniData TERM - For
Page 104 and 105:
BITAND Syntax BITAND(num.expr1,num.
Page 106 and 107:
BITOR Syntax BITOR(num.expr1,num.ex
Page 108 and 109:
BPIOCP Syntax BPIOCP Description Th
Page 110 and 111:
BPIOCPN Syntax BPIOCPN Description
Page 112 and 113:
BREAK Syntax BREAK [KEY] {ON | OFF
Page 114 and 115:
BYTELEN Syntax BYTELEN (string) Des
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
CALLC Syntax CALLC c.sub.name [(arg
Page 122 and 123:
CASE Syntax BEGIN CASE CASE express
Page 124 and 125:
In the next example, the program se
Page 126 and 127:
Related Commands UniBasic CATS, SPL
Page 128 and 129:
CHAIN Syntax CHAIN "str.expr" Descr
Page 130 and 131:
CHANGE Syntax CHANGE(string, old.su
Page 132 and 133:
CHAR Syntax CHAR(expr) Description
Page 134 and 135:
CHARLEN Syntax CHARLEN (string) Des
Page 136 and 137:
CHECKSUM Syntax CHECKSUM(str.expr)
Page 138 and 139:
Related Commands UniBasic COMMON, C
Page 140 and 141:
UniData DELETECOMMON, STACKCOMMON -
Page 142 and 143:
CLEARFILE Syntax CLEARFILE [file.va
Page 144 and 145:
CLEARINPUT Syntax CLEARINPUT Synony
Page 146 and 147:
UniQuery GET.LIST, SELECT, SSELECT
Page 148 and 149:
CLOSE Syntax CLOSE [file.var] [ON E
Page 150 and 151:
CLOSESEQ Syntax CLOSESEQ seq.file.v
Page 152 and 153:
closeSocket Syntax closeSocket(sock
Page 154 and 155:
COL1 Syntax COL1( ) Description The
Page 156 and 157:
COMMON Syntax COMMON [/common.name/
Page 158 and 159:
1-161 UniBasic Commands Reference
Page 160 and 161:
UniData DELETECOMMON, STACKCOMMON -
Page 162 and 163:
Related Command UniBasic EXIT 1-165
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
COUNT Syntax COUNT(str.expr1, str.e
Page 170 and 171:
COUNTS Syntax COUNTS(expr,str.expr)
Page 172 and 173:
createCertificate Syntax createCert
Page 174 and 175:
createCertRequest Syntax createCert
Page 176 and 177:
Parameter Description The following
Page 178 and 179:
The following table describes the a
Page 180 and 181:
createSecureRequest Syntax createSe
Page 182 and 183:
Method Description The following ta
Page 184 and 185:
Page 186 and 187:
DATA Syntax DATA expr1 [,expr2]...
Page 188 and 189:
DBTOXML Syntax DBTOXML(xml_document
Page 190 and 191:
DCOUNT Syntax DCOUNT(str,delim) Des
Page 192 and 193:
DEACTIVATEKEY Syntax DEACTIVATEKEY
Page 194 and 195:
STATUS Code Example The following e
Page 196 and 197:
DEFFUN Syntax DEFFUN function.name
Page 198 and 199:
The preceding program calls the fol
Page 200 and 201:
Examples The following program segm
Page 202 and 203:
Examples The following program stat
Page 204 and 205:
In the next example, the program st
Page 206 and 207:
UniData SQL SELECT - For informatio
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
DIGEST Syntax DIGEST(algorithm, dat
Page 214 and 215:
DIR Syntax DIR(file.expr) Descripti
Page 216 and 217:
STATUS Codes DISABLEDEC has the fol
Page 218 and 219:
DISPLAYWIDTH Syntax DISPLAYWIDTH (s
Page 220 and 221:
DQUOTE DQUOTE is a synonym for the
Page 222 and 223:
Related Commands UniBasic PRECISION
Page 224 and 225:
ECHO Syntax ECHO [ON | OFF | expr]
Page 226 and 227:
EDADRV_CloseStmt Syntax RETCODE EDA
Page 228 and 229:
EDADRV_Connect Syntax RETCODE EDADR
Page 230 and 231:
EDADRV_Disconnect Syntax RETCODE ED
Page 232 and 233:
Page 234 and 235:
Return Codes The following table de
Page 236 and 237:
Output Variable The following table
Page 238 and 239:
Output Variables The following tabl
Page 240 and 241:
EDADRV_GetDBInfo Syntax RETCODE EDA
Page 242 and 243:
EDADRV_GetEDAAttr Syntax RETCODE ED
Page 244 and 245:
EDADRV_GetErrmsg Syntax RETCODE EDA
Page 246 and 247:
Input Variables The following table
Page 248 and 249:
EDADRV_LoadSymbols Syntax RETCODE E
Page 250 and 251:
Output Variables The following tabl
Page 252 and 253:
Return Codes The following table de
Page 254 and 255:
Input Variables The following table
Page 256 and 257:
STATUS Codes ENABLEDEC has the foll
Page 258 and 259:
Parameter Description dataLoc 1 - D
Page 260 and 261:
Parameters he following table descr
Page 262 and 263:
END Syntax END Description The UniB
Page 264 and 265:
Related Commands UniBasic CALL, CHA
Page 266 and 267:
Page 268 and 269:
EQU Syntax EQU constant1 TO value1
Page 270 and 271:
In the next example, UniData replac
Page 272 and 273:
EXECUTE Syntax EXECUTE "str.expr" [
Page 274 and 275:
Parameter Description Reminder: The
Page 276 and 277:
Related Commands UniBasic COMMON, E
Page 278 and 279:
Parameter Description Examples In t
Page 280 and 281:
The program output is: 1-274 UniBas
Page 282 and 283:
EXP Syntax EXP(expr) Description Th
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Options The value of option determi
Page 290 and 291:
FILEINFO Syntax FILEINFO(file.var,
Page 292 and 293:
Code 9 Merge factor percentage 10 S
Page 294 and 295:
FILELOCK Syntax FILELOCK [file.var]
Page 296 and 297:
FILEUNLOCK Syntax FILEUNLOCK [file.
Page 298 and 299:
FIND Syntax FIND expr IN dyn.array[
Page 300 and 301:
Related Commands UniBasic [], FINDS
Page 302 and 303:
Page 304 and 305:
FMT Syntax FMT(expr, "len [f.char]
Page 306 and 307:
STATUS Function Return Values After
Page 308 and 309:
FOOTING Syntax FOOTING [ON num.expr
Page 310 and 311:
Related Commands UniBasic GETPTR, H
Page 312 and 313:
This program segment produces the f
Page 314 and 315:
Parameter Description Examples The
Page 316 and 317:
FUNCTION Syntax FUNCTION function.n
Page 318 and 319:
The following program calls the pre
Page 320 and 321:
GE Syntax expr1 GE expr2 Synonyms #
Page 322 and 323:
generateKey Syntax generateKey(priv
Page 324 and 325:
Return Code Status 1-286 UniBasic C
Page 326 and 327:
GET Syntax GET[X] var[,length] [SET
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
getHTTPDefault Syntax getHTTPDefaul
Page 334 and 335:
GETLIST Syntax GETLIST list.name [,
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
GETQUEUE Syntax GETQUEUE() Descript
Page 342 and 343:
GETREADU Syntax GETREADU() Descript
Page 344 and 345:
getResponseHeader Syntax getRespons
Page 346 and 347:
The following table describes each
Page 348 and 349:
Page 350 and 351:
GETUSERGROUP Syntax GETUSERGROUP(ui
Page 352 and 353:
GETUSERNAME Syntax GETUSERNAME(uid)
Page 354 and 355:
Page 356 and 357:
Related Commands UniBasic GOSUB, ON
Page 358 and 359:
Page 360 and 361:
Parameter Description The replace.n
Page 362 and 363:
This next example compiles and runs
Page 364 and 365:
Related Command UniBasic GTS 1-326
Page 366 and 367:
HASH Syntax HASH(rec.key,modulo,typ
Page 368 and 369:
Page 370 and 371:
HUSH Syntax HUSH {ON | OFF | expr}
Page 372 and 373:
ICONV Syntax ICONV(expr,conv.code.e
Page 374 and 375:
Page 376 and 377:
Page 378 and 379:
The following table describes vario
Page 380 and 381:
Related Command UniBasic OCONV Grou
Page 382 and 383:
Page 384 and 385: Parameters Description Example You
Page 386 and 387: Parameter Description Examples In t
Page 388 and 389: Parameter Description Example In th
Page 390 and 391: ICONV Packed Decimal (MP1) Syntax I
Page 392 and 393: Parameter Description Example In th
Page 394 and 395: Example The following table describ
Page 396 and 397: The following table lists conversio
Page 398 and 399: ICONV Pattern Match (P) Syntax ICON
Page 400 and 401: Example In the following example, t
Page 402 and 403: ICONV Text Extraction (T) Syntax IC
Page 404 and 405: ICONV File Translation (Tfile) Synt
Page 406 and 407: STATUS Function Return Values After
Page 408 and 409: 1-369 UniBasic Commands Reference
Page 410 and 411: INDEX Syntax INDEX(str.expr1,str.ex
Page 412 and 413: INDICES Syntax INDICES(file.var[, i
Page 414 and 415: initSecureServerSocket function Syn
Page 416 and 417: initServerSocket Syntax initServerS
Page 418 and 419: INMAT Syntax INMAT( ) INMAT(array.n
Page 420 and 421: Related Commands UniBasic DIM, MAT,
Page 422 and 423: Warning: Processing differs when yo
Page 424 and 425: In the next example, the INPUT stat
Page 426 and 427: Parameter Description 1-387 UniBasi
Page 428 and 429: Related Commands UniBasic CLEARINPU
Page 430 and 431: INPUTERR Syntax INPUTERR error.expr
Page 432 and 433: INPUTIF Syntax INPUTIF var [THEN st
Page 436 and 437: INS Syntax INS expr BEFORE dyn.arra
Page 438 and 439: INSERT Syntax INSERT(dyn.array.expr
Page 440 and 441: INT Syntax INT(num.expr) Descriptio
Page 442 and 443: ISNV Syntax ISNV(expr) Description
Page 444 and 445: ISNVS Syntax ISNVS(dynamic.array) D
Page 446 and 447: ITYPE Syntax ITYPE(itype.expr) Desc
Page 448 and 449: LE Syntax expr1 LE expr2 Synonyms #
Page 450 and 451: LEN Syntax LEN(str.expr) Descriptio
Page 452 and 453: LENS Syntax LENS(dyn.array) Descrip
Page 454 and 455: LISTUSER Syntax LISTUSER() Descript
Page 456 and 457: LN Syntax LN(num.expr) Description
Page 458 and 459: The following table describes the s
Page 460 and 461: Parameters The following table desc
Page 462 and 463: LOCATE in BASICTYPEs U, P, and M Th
Page 464 and 465: However, in the following array, th
Page 466 and 467: Parameters The following table desc
Page 468 and 469: LOOP/REPEAT Syntax LOOP [statements
Page 470 and 471: Examples The following example is t
Page 472 and 473: LOWER Syntax LOWER(dyn.array.expr)
Page 474 and 475: Related Command UniBasic LTS 1-434
Page 476 and 477: MAT Syntax MAT dim.array = expr MAT
Page 478 and 479: the values assigned to FEE1 would b
Page 480 and 481: Parameter Description Examples In t
Page 482 and 483: MATCH Syntax var MATCH "[~] len [X,
Page 484 and 485:
MATCHFIELD Syntax MATCHFIELD(str.ex
Page 486 and 487:
MATPARSE Syntax MATPARSE dim.array
Page 488 and 489:
The preceding program segment produ
Page 490 and 491:
Parameter Description INMAT Functio
Page 492 and 493:
MATREADL Syntax MATREADL dim.array
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Related Commands UniBasic DIM, INMA
Page 500 and 501:
Parameter Description STATUS Functi
Page 502 and 503:
MATWRITEU Syntax MATWRITEU dim.arra
Page 504 and 505:
MAXIMUM Syntax MAXIMUM(dyn.array.va
Page 506 and 507:
MDPERFORM Syntax MDPERFORM str.expr
Page 508 and 509:
Page 510 and 511:
MINIMUM Syntax MINIMUM(dyn.array.va
Page 512 and 513:
NE Syntax expr1 NE expr2 Synonyms #
Page 514 and 515:
NEG Syntax NEG(expr) Description Th
Page 516 and 517:
NFAUSER Syntax NFAUSER(“username
Page 518 and 519:
DCOUNT INDEX LEN SEQ SWAP 1-480
Page 520 and 521:
NOTS Syntax NOTS(dyn.array) Descrip
Page 522 and 523:
NUM Syntax NUM(expr) Description Th
Page 524 and 525:
NUMS Syntax NUMS(dyn.array) Descrip
Page 526 and 527:
OCONV Syntax OCONV(expr, conv.code.
Page 528 and 529:
OCONV Date (D) Syntax OCONV(integer
Page 530 and 531:
Note: Following SMA standards, Mond
Page 532 and 533:
Related Commands UniBasic DATE, ICO
Page 534 and 535:
Related Command UniBasic ICONV Grou
Page 536 and 537:
Related Command UniBasic ICONV Leng
Page 538 and 539:
Parameter Description Examples The
Page 540 and 541:
OCONV Masked Decimal (MD) Syntax OC
Page 542 and 543:
Examples The following table descri
Page 544 and 545:
Parameter Description [ [prefix], [
Page 546 and 547:
OCONV Packed Decimal (MP) Syntax OC
Page 548 and 549:
OCONV Right Justify (MR) Syntax OCO
Page 550 and 551:
Examples In the following statement
Page 552 and 553:
Related Commands UniBasic DATE, ICO
Page 554 and 555:
The following table indicates which
Page 556 and 557:
OCONV Pattern Match (P) Syntax OCON
Page 558 and 559:
OCONV Range (R) Syntax OCONV(num.ex
Page 560 and 561:
OCONV SOUNDEX (S) Syntax OCONV(str.
Page 562 and 563:
OCONV Text Extraction (T) Syntax OC
Page 564 and 565:
OCONV File Translation (Tfile) Synt
Page 566 and 567:
OCONVS Syntax OCONVS(dyn.array.expr
Page 568 and 569:
ON/GOSUB Syntax ON expr GOSUB label
Page 570 and 571:
Related Commands UniBasic GOSUB, GO
Page 572 and 573:
Page 574 and 575:
Parameter Description 1-535 UniBasi
Page 576 and 577:
openSecureSocket function Syntax op
Page 578 and 579:
OPENSEQ Syntax OPENSEQ [absolutepat
Page 580 and 581:
Page 582 and 583:
The following table describes the r
Page 584 and 585:
Example The following example illus
Page 586 and 587:
OSBREAD Syntax OSBREAD var FROM fil
Page 588 and 589:
Page 590 and 591:
Writing to Other Types of Files For
Page 592 and 593:
Related Commands UniBasic CLOSESEQ,
Page 594 and 595:
Page 596 and 597:
Page 598 and 599:
Page 600 and 601:
OSREAD Syntax OSREAD var FROM filen
Page 602 and 603:
OSWRITE Syntax OSWRITE expr {ON | T
Page 604 and 605:
PAGE Syntax PAGE [ON num.expr] [exp
Page 606 and 607:
PAUSE Syntax PAUSE [wait_time] Desc
Page 608 and 609:
PCPERFORM Syntax PCPERFORM str.expr
Page 610 and 611:
PERFORM PERFORM is a synonym for th
Page 612 and 613:
Related Command UniData FLOAT.PRECI
Page 614 and 615:
Example The following example illus
Page 616 and 617:
Page 618 and 619:
PRINTER Syntax PRINTER {ON | OFF} D
Page 620 and 621:
PRINTERR Syntax PRINTERR expr [FROM
Page 622 and 623:
Code Description Examples In the fo
Page 624 and 625:
PROCREAD Syntax PROCREAD var {THEN
Page 626 and 627:
The following globally cataloged pr
Page 628 and 629:
PROCWRITE Syntax PROCWRITE expr Des
Page 630 and 631:
PROMPT Syntax PROMPT str.expr Descr
Page 632 and 633:
protocolLogging Syntax protocolLogg
Page 634 and 635:
PWR Syntax PWR(num.expr1, num.expr2
Page 636 and 637:
Related Command UniBasic SQUOTE 1-5
Page 638 and 639:
READ Syntax READ dyn.array.var FROM
Page 640 and 641:
Page 642 and 643:
Page 644 and 645:
READBCKL Syntax READBCKL dyn.array.
Page 646 and 647:
Page 648 and 649:
READBCKU Syntax READBCKU dyn.array.
Page 650 and 651:
Page 652 and 653:
READFWD Syntax READFWD dyn.array.va
Page 654 and 655:
Page 656 and 657:
Page 658 and 659:
Related Commands UniBasic READBCK,
Page 660 and 661:
Page 662 and 663:
Related Commands UniBasic READBCK,
Page 664 and 665:
Page 666 and 667:
UniData DEFAULT.LOCKED.ACTION - For
Page 668 and 669:
Page 670 and 671:
READNEXT Syntax READNEXT id.var [,
Page 672 and 673:
Page 674 and 675:
READNEXTTUPLE Syntax READNEXTTUPLE
Page 676 and 677:
Page 678 and 679:
READSEQ Syntax READSEQ var FROM seq
Page 680 and 681:
eadSocket Syntax readSocket(socket_
Page 682 and 683:
READT Syntax READT [UNIT (mu.expr)]
Page 684 and 685:
Page 686 and 687:
Page 688 and 689:
Related Commands UniBasic CLOSE, DE
Page 690 and 691:
Page 692 and 693:
READVL Syntax READVL var FROM [file
Page 694 and 695:
Example In the following example, R
Page 696 and 697:
Page 698 and 699:
READXBCK Syntax READXBCK dyn.array.
Page 700 and 701:
READXFWD Syntax READXFWD dyn.array.
Page 702 and 703:
ReadXMLData Syntax ReadXMLData(xml_
Page 704 and 705:
RECORDLOCKED Syntax RECORDLOCKED (f
Page 706 and 707:
Page 708 and 709:
Page 710 and 711:
RECORDLOCKU Syntax RECORDLOCKU [fil
Page 712 and 713:
RELEASE Syntax RELEASE [file.var [,
Page 714 and 715:
ReleaseXML Syntax ReleaseXML(XMLhan
Page 716 and 717:
Example In the following example, c
Page 718 and 719:
Parameter Description The SETTING c
Page 720 and 721:
In some implementations, the values
Page 722 and 723:
REMOVE Syntax REMOVE(dyn.array.var,
Page 724 and 725:
REPLACE Syntax REPLACE(dyn.array.ex
Page 726 and 727:
Page 728 and 729:
RESIZET Syntax RESIZET [UNIT(mu.exp
Page 730 and 731:
RETURN Syntax RETURN [TO label[:]]
Page 732 and 733:
Page 734 and 735:
Page 736 and 737:
RNDSEED Syntax RNDSEED expr Descrip
Page 738 and 739:
SADD Syntax SADD(x, y) Description
Page 740 and 741:
The following table describes the s
Page 742 and 743:
Page 744 and 745:
SELECT Syntax SELECT file.var [TO {
Page 746 and 747:
Page 748 and 749:
SELECTINDEX Syntax SELECTINDEX inde
Page 750 and 751:
Related Commands UniBasic DELETELIS
Page 752 and 753:
Related Commands UniBasic DELETELIS
Page 754 and 755:
Note: SEND with the X option suppre
Page 756 and 757:
SEQS Syntax SEQS("char.expr") Descr
Page 758 and 759:
Page 760 and 761:
Page 762 and 763:
Page 764 and 765:
setHTTPDefault Syntax setHTTPDefaul
Page 766 and 767:
Page 768 and 769:
Page 770 and 771:
Page 772 and 773:
setPrivateKey Syntax setPrivateKey(
Page 774 and 775:
setRandomSeed Syntax setRandomSeed(
Page 776 and 777:
setRequestHeader Syntax setRequestH
Page 778 and 779:
setSocketOptions Syntax setSocketOp
Page 780 and 781:
showSecurityContext Syntax showSecu
Page 782 and 783:
SIGNATURE Syntax SIGNATURE(algorith
Page 784 and 785:
Return Code Status 1-742 UniBasic C
Page 786 and 787:
SLEEP Syntax SLEEP [hh:mm[:ss]] [se
Page 788 and 789:
SMUL Syntax SMUL(x, y) Description
Page 790 and 791:
Return Codes The return code indica
Page 792 and 793:
The following table describes each
Page 794 and 795:
SOAPGetDefault Syntax SOAPGetDefaul
Page 796 and 797:
SOAPGetFault Syntax SOAPGetFault(re
Page 798 and 799:
SOAPGetResponseHeader Syntax SOAPGe
Page 800 and 801:
SOAPRequestWrite Syntax SOAPRequest
Page 802 and 803:
SOAPSetDefault Syntax SOAPSetDefaul
Page 804 and 805:
Along with SOAPSetDefault, the Call
Page 806 and 807:
Page 808 and 809:
Page 810 and 811:
Page 812 and 813:
You can also use the UniBasic STATU
Page 814 and 815:
Page 816 and 817:
SOUNDEX Syntax SOUNDEX(expr) Descri
Page 818 and 819:
SPACE Syntax SPACE(expr) Descriptio
Page 820 and 821:
SPLICE Syntax SPLICE(expr1,"expr",
Page 822 and 823:
SQLAllocConnect Syntax status = SQL
Page 824 and 825:
SQLAllocEnv Syntax status = SQLAllo
Page 826 and 827:
SQLAllocStmt Syntax status = SQLAll
Page 828 and 829:
SQLBindCol Syntax status = SQLBindC
Page 830 and 831:
SQLBindParameter Syntax status = SQ
Page 832 and 833:
Page 834 and 835:
SQLCancel Syntax status = SQLCancel
Page 836 and 837:
SQLColAttributes Syntax status = SQ
Page 838 and 839:
1-796 UniBasic Commands Reference C
Page 840 and 841:
SQLColumns Syntax status = SQLColum
Page 842 and 843:
Return Values The following table d
Page 844 and 845:
Parameter Description Return Values
Page 846 and 847:
Page 848 and 849:
Page 850 and 851:
ODBC Data Sources When a program is
Page 852 and 853:
SQLExecDirect Syntax status = SQLEx
Page 854 and 855:
Page 856 and 857:
SQLExecute tells the data source to
Page 858 and 859:
Page 860 and 861:
Page 862 and 863:
Page 864 and 865:
Page 866 and 867:
SQLGetInfo Syntax status = SQLGetIn
Page 868 and 869:
1-826 UniBasic Commands Reference S
Page 870 and 871:
Return Values The following table l
Page 872 and 873:
Page 874 and 875:
Page 876 and 877:
SQLNumParams Syntax status = SQLNum
Page 878 and 879:
SQLNumResultCols Syntax status = SQ
Page 880 and 881:
SQLParamOptions Syntax status = SQL
Page 882 and 883:
Example This example shows how you
Page 884 and 885:
ODBC Data Sources If you execute a
Page 886 and 887:
SQLRowCount Syntax status = SQLRowC
Page 888 and 889:
SQLSetConnectOption Syntax status =
Page 890 and 891:
Page 892 and 893:
SQLSetParam SQLSetParam is a synony
Page 894 and 895:
For complete details about the SQLS
Page 896 and 897:
Page 898 and 899:
Parameter Description tablename Nam
Page 900 and 901:
TYPE Smallint Not null 1-858 UniBas
Page 902 and 903:
SQLTables Syntax status = SQLTables
Page 904 and 905:
Page 906 and 907:
Page 908 and 909:
SQRT Syntax SQRT(num.expr) Descript
Page 910 and 911:
SSUB Syntax SSUB(x, y) Description
Page 912 and 913:
STOP Syntax STOP [expr] Description
Page 914 and 915:
STR Syntax STR(str.expr, num.expr)
Page 916 and 917:
STRS Syntax STRS(dyn.array, expr) D
Page 918 and 919:
If the response status indicates th
Page 920 and 921:
SUBROUTINE Syntax SUBROUTINE sub.na
Page 922 and 923:
SUBROUTINE (Update Trigger) Syntax
Page 924 and 925:
Tip: The UniBasic STATUS function r
Page 926 and 927:
SUBROUTINE (Delete Trigger) Syntax
Page 928 and 929:
Tip: The UniBasic STATUS function r
Page 930 and 931:
Related Commands UniBasic DEL, INSE
Page 932 and 933:
Page 934 and 935:
In the next example, SWAP does not
Page 936 and 937:
Page 938 and 939:
Page 940 and 941:
TAN Syntax TAN(num.expr) Descriptio
Page 942 and 943:
TIMEDATE Syntax TIMEDATE( ) Descrip
Page 944 and 945:
Page 946 and 947:
Page 948 and 949:
TRANSACTION START Syntax TRANSACTIO
Page 950 and 951:
TRIM Syntax TRIM(str.expr[,char[,ty
Page 952 and 953:
Related Commands UniBasic TRIMB, TR
Page 954 and 955:
TRIMF Syntax TRIMF(str.expr) Descri
Page 956 and 957:
Page 958 and 959:
Page 960 and 961:
UNLOCK Syntax UNLOCK [num.expr] Des
Page 962 and 963:
UPCASE Syntax UPCASE(string.expr) D
Page 964 and 965:
Related Commands UniBasic PAUSE Uni
Page 966 and 967:
Page 968 and 969:
Related Commands UniBasic CLOSESEQ,
Page 970 and 971:
Page 972 and 973:
Related Commands UniBasic CLOSE, DE
Page 974 and 975:
Page 976 and 977:
Parameter Description Example In th
Page 978 and 979:
Parameter Description Example In th
Page 980 and 981:
The following table describes the r
Page 982 and 983:
Page 984 and 985:
WRITEU Syntax WRITEU expr {ON | TO}
Page 986 and 987:
Return Value Description Example In
Page 988 and 989:
Page 990 and 991:
The following example is taken from
Page 992 and 993:
Page 994 and 995:
Page 996 and 997:
Page 998 and 999:
Page 1000 and 1001:
Page 1002 and 1003:
Page 1004 and 1005:
Page 1006 and 1007:
Page 1008 and 1009:
Page 1010 and 1011:
Page 1012 and 1013:
Page 1014 and 1015:
Page 1016 and 1017:
Page 1018 and 1019:
Page 1020 and 1021:
Page 1022 and 1023:
Page 1024 and 1025:
Page 1026 and 1027:
Page 1028 and 1029:
Page 1030 and 1031:
Page 1032 and 1033:
Page 1034 and 1035:
Page 1036 and 1037:
Page 1038 and 1039:
Page 1040 and 1041:
Page 1042 and 1043:
Page 1044 and 1045:
Page 1046 and 1047:
Page 1048 and 1049:
Page 1050 and 1051:
Page 1052 and 1053:
Page 1054 and 1055:
Page 1056 and 1057:
Page 1058 and 1059:
Page 1060 and 1061:
Page 1062 and 1063:
Page 1064 and 1065:
Page 1066 and 1067:
Page 1068 and 1069:
Page 1070 and 1071:
Page 1072 and 1073:
Page 1074 and 1075:
Page 1076 and 1077:
Page 1078 and 1079:
ASCII Character Codes This appendix
Page 1080 and 1081:
A-3 UniBasic Commands Reference ASC
Page 1082 and 1083:
Page 1084 and 1085:
Page 1086 and 1087:
Page 1088 and 1089:
A-11 UniBasic Commands Reference AS
Page 1090 and 1091:
UniBasic@variables This appendix li
Page 1092 and 1093:
B-3 UniBasic Commands Reference @va
Page 1094 and 1095:
@USER0 @USER1 @USER2 @USER3 @USER4
Page 1096 and 1097:
B-7 UniBasic Commands Reference @SY
Page 1098 and 1099:
B-9 UniBasic Commands Reference Uni
Page 1100 and 1101:
C-2 UniBasic Commands Reference Ari
Page 1102 and 1103:
C-4 UniBasic Commands Reference Boo
Page 1104 and 1105:
Reserved Words This appendix lists
Page 1106 and 1107:
D-3 UniBasic Commands Reference Res
Page 1108 and 1109:
Page 1110 and 1111:
Page 1112 and 1113:
Page 1114 and 1115:
Commands Affected by BASICTYPEs and
Page 1116 and 1117:
Command or Function E-3 UniBasic Co
Page 1118 and 1119:
Page 1120 and 1121:
Page 1122 and 1123:
F-2 UniBasic Commands Reference Com
Page 1124 and 1125:
Page 1126 and 1127:
SUBROUTINE (Update Trigger) SUBROUT
Page 1128 and 1129:
show all

UniBasic Commands Reference - Rocket Software

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?