M Series Pin and Socket Connectors

Shields,Two-Piece,
45° and 30° Cable Exit
Material and Finish
Shields and Cable Clamps—Steel,
nickel plated
Screws—Steel, zinc plated
These Two-Piece Shields
are used to protect connectors
from dust, dirt and
physical damage and to
provide strain relief for the
contacts. They feature integral
cable clamps formed
at 45° and are specifically
designed for use with 104 CF
and 160 CF position standard
connectors; 30° exit
shield is available for 29 CF
position connectors.
These Shields may be used
with Pin Hoods to provide
pin protection.
These Two-Piece Shields
may be secured to a connector
housing using other
appropriate hardware such
as Guide Pins and Sockets.
Tyco does NOT recommend
the use of shields
with posted connectors
because of the p o t e n t i a lof
shorting.
Dimensions are shown for reference
purposes only.
M Series
Pin and Socket Connectors
Protective Hardware (Continued)
Dimensions are in inches and millimeters
unless otherwise specified.
Values in brackets are metric equivalents.
45° Cable Exit
A
Assembled
Note: A typical 45° Cable Exit Shield is illustrated. Slight differences in configuration exist between sizes.
Two-Piece Shields, 45° Cable Exit
A
Dimensions
B C
Specifications subject to change. Technical Support Center
1-800-522-6752
www.tycoelectronics.com
B
Catalog 82003
Revised 3-01
Shield Part No.
Max.
Cable
Connectors Used On
(No. of Positions)
Dia. Standard
1.145 2.845
2.375
60.33
202169-1
1.000
25.4
29.08 72.26 1.875
47.63
202110-1
.650
16.51
1.845
46.86
2.770
70.36
2.750
69.85
202798-1
1.200
30.48
Note: All parts are packaged unassembled.
Two-Piece Shield, 30° Cable Exit
A
Dimensions
B C
C
104 CF
160 CF
Shield Part No.
Max.
Cable
Connectors Used On
(No. of Positions)
Dia. Standard
1.375 2.685 3.440 1.250
34.93 68.19 87.38
202483-1
31.75
29 CF
87