M Series Pin and Socket Connectors
M Series Pin and Socket Connectors
M Series Pin and Socket Connectors
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
82<br />
<strong>Pin</strong> Hoods, Internal<br />
Open-End <strong>and</strong> Closed-End<br />
Material <strong>and</strong> Finish<br />
See charts<br />
<strong>Pin</strong> Hoods are used to<br />
protect pin contacts that<br />
protrude from a connector<br />
housing.<br />
When contacts are mixed<br />
(pins <strong>and</strong> sockets in both<br />
housings), an Internal <strong>Pin</strong><br />
Hood is used on one housing<br />
<strong>and</strong> an External <strong>Pin</strong><br />
Hood (page 83) is used<br />
on the other housing. Or a<br />
Long Shield is used on one<br />
housing <strong>and</strong> an External <strong>Pin</strong><br />
Hood must be used on the<br />
other housing. When a<br />
housing is loaded with all<br />
pin contacts, an Internal or<br />
External <strong>Pin</strong> Hood may be<br />
used—no <strong>Pin</strong> Hood is<br />
required on the mating half.<br />
External Open-End <strong>Pin</strong><br />
Hoods with flanges (page<br />
83) are used primarily for<br />
mounting a connector with<br />
pin contacts to a panel.<br />
All <strong>Pin</strong> Hoods may be<br />
secured to connector<br />
housings using other appropriate<br />
hardware, such as<br />
Jackscrews <strong>and</strong> Guide <strong>Pin</strong>s<br />
<strong>and</strong> <strong>Socket</strong>s.<br />
Dimensions are shown for reference<br />
purposes only.<br />
M <strong>Series</strong><br />
<strong>Pin</strong> <strong>and</strong> <strong>Socket</strong> <strong>Connectors</strong><br />
Protective Hardware<br />
<strong>Pin</strong> Hoods, Internal Open-End<br />
Dimensions are in inches <strong>and</strong> millimeters<br />
unless otherwise specified.<br />
Values in brackets are metric equivalents.<br />
C<br />
B<br />
A<br />
Internal Open-End Internal Closed-End<br />
Specifications subject to change. Technical Support Center<br />
1-800-522-6752<br />
www.tycoelectronics.com<br />
C<br />
B<br />
A<br />
Catalog 82003<br />
Revised 3-01<br />
Note: Typical Internal Open-End <strong>and</strong> Closed-End <strong>Pin</strong> Hoods are illustrated. Slight differences in configuration exist<br />
for various sizes. The mounting holes <strong>and</strong>/or slots in each <strong>Pin</strong> Hood match the mounting hole pattern of the<br />
connector housing on which the <strong>Pin</strong> Hood is used.<br />
<strong>Connectors</strong> Used On (No. of Positions)<br />
Dimensions<br />
A B C<br />
Material<br />
<strong>Pin</strong> Hood<br />
Part No. St<strong>and</strong>ard Posted<br />
Special Application<br />
High High<br />
Current<br />
Mixed<br />
Voltage<br />
1.000<br />
25.4<br />
.500<br />
12.7<br />
.718<br />
18.24<br />
Nickel Plated<br />
Steel<br />
204258-6 6 6 — — —<br />
1.250<br />
31.75<br />
.550<br />
13.97<br />
.718<br />
18.24<br />
Nickel Plated<br />
Steel<br />
201363-4 14 14 — — —<br />
1.632<br />
41.45<br />
.725<br />
18.42<br />
.718<br />
18.24<br />
Nickel Plated<br />
Steel<br />
201785-4 26 26 — 15 —<br />
2.000<br />
50.8<br />
.880<br />
22.35<br />
.718<br />
18.24<br />
Nickel Plated<br />
Steel<br />
201786-4 34 34 — 16 20<br />
<strong>Pin</strong> Hoods, Internal Closed-End<br />
<strong>Connectors</strong> Used On (No. of Positions)<br />
Dimensions<br />
A B C<br />
Material<br />
<strong>Pin</strong> Hood<br />
Part No. St<strong>and</strong>ard Posted<br />
Special Application<br />
High High<br />
Current<br />
Mixed<br />
Voltage<br />
2.130<br />
54.1<br />
.880<br />
22.35<br />
.687<br />
17.45<br />
Nickel Plated<br />
Steel<br />
202434-4 34 34 — 16 20<br />
2.875<br />
73.02<br />
.952<br />
24.18<br />
.687<br />
17.45<br />
Nickel Plated<br />
Steel<br />
202394-2 50 50 — 42 —<br />
2.765<br />
70.23<br />
1.310<br />
33.27<br />
.687<br />
17.45<br />
Nickel Plated<br />
Steel<br />
201369-4 75 75 12 — 28<br />
2.975<br />
75.57<br />
1.740<br />
44.2<br />
.687<br />
17.45<br />
Nickel Plated<br />
Steel<br />
201364-4 104 104 — — —<br />
2.975<br />
75.57<br />
2.040<br />
51.82<br />
.687<br />
17.45<br />
Nickel Plated<br />
Steel<br />
203743-4 CF160 CF CF160 CF — — —