M Series Pin and Socket Connectors
M Series Pin and Socket Connectors
M Series Pin and Socket Connectors
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1. Confirm that Application A (at left) most closely meets<br />
your requirements. (Other applications are shown on<br />
pages 12 through 25.)<br />
2. Find the appropriate column for the number of positions<br />
required.<br />
3. Select part numbers required for the application listed<br />
in the column below the number of positions.<br />
3. If a part number is not listed for a particular item, it is<br />
not available.<br />
3. If more than one part number is listed for a particular<br />
hardware item, choose the one which best fits your<br />
application.<br />
4. Dimensional information is available on the indicated<br />
pages under description column.<br />
5. Select Contacts: Type II (page 30), Type III+ (pages 31<br />
through 35) or Subminiature Coaxial (pages 40, 41).<br />
Dimensions are shown for reference<br />
purposes only.<br />
M <strong>Series</strong><br />
<strong>Pin</strong> <strong>and</strong> <strong>Socket</strong> <strong>Connectors</strong><br />
Cable-to-Cable (Continued)<br />
Dimensions are in inches <strong>and</strong> millimeters<br />
unless otherwise specified.<br />
Values in brackets are metric equivalents.<br />
Specifications subject to change. Technical Support Center<br />
1-800-522-6752<br />
www.tycoelectronics.com<br />
Catalog 82003<br />
Revised 3-01<br />
Special application housings may be substituted<br />
for these st<strong>and</strong>ard housings. See Special Application<br />
Section.<br />
This cable-to-cable application utilizes locking springs,<br />
strain relief clamps, a pin hood for pin protection <strong>and</strong> guide<br />
hardware.<br />
The 34 <strong>and</strong> 50 position connectors can be used with either<br />
center or corner guide hardware. If center guide hardware<br />
is used, an additional four 4-40 screws, nuts <strong>and</strong> lockwashers<br />
are required to secure the locking springs. Corner guides<br />
require four guide pins <strong>and</strong> four guide sockets for each<br />
mated pair of connectors.<br />
41 50<br />
Number of Positions<br />
75 104 104 CF 160 CF<br />
Component Description<br />
202135-2<br />
201302-1<br />
201358-1<br />
200277-2<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
Plug Block<br />
Receptacle Block<br />
Phenolic<br />
202135-4<br />
201302-3<br />
—<br />
—<br />
201358-3<br />
200277-4<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
1-201692-6<br />
—<br />
—<br />
—<br />
—<br />
—<br />
Plug Block<br />
Receptacle Block<br />
Plug Block<br />
Receptacle Block<br />
Diallyl Phthalate<br />
Polyester<br />
STANDARD<br />
HOUSINGS<br />
Pages 44 to 51<br />
—<br />
—<br />
—<br />
201182-1<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
Long<br />
Short<br />
Nickel Plated Steel<br />
STRAIN<br />
RELIEF<br />
201766-1<br />
—<br />
201847-1<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
Long<br />
Short<br />
Stainless Steel<br />
CLAMPS<br />
Page 88<br />
200389-2<br />
200390-2<br />
—<br />
—<br />
200389-2<br />
200390-2<br />
200833-2<br />
200835-2<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
—<br />
Center Male<br />
Center Female<br />
Corner Male<br />
Corner Female<br />
Stainless Steel<br />
GUIDE<br />
HARDWARE<br />
Page 81<br />
201921-1 201925-1 — — — — Male—Nickel Plated Spring Steel<br />
LOCKING SPRINGS1<br />
201922-1 201926-1 — — — — Female—Stainless Steel Page 80<br />
— — — — — — Internal Open End Nickel Plated Steel<br />
— — — — — — Internal Closed End Nickel Plated Steel PIN HOODS<br />
— — — — — — External Closed End Al Iridite Pages 82 <strong>and</strong> 83<br />
— — — — — — External Closed End Nickel Plated Steel<br />
11