Middle and Late Bronze Age Metal Tools from the Aegean, Eastern ...

More documents

Recommendations

Info

Sites & Object types Kültepe - MBA Specific object date Tool type category Context L W Bibliography Awl 17th century BC; level Ia Small crafts Settlement Deshayes 159; Kultepe 1948, p. 200, pl. LXIII, number 374 and 390 Ax, trunnion/lugged Karum Kanesh Ib, 18th centuryCarpentry/masonry Settlement 9.5 blade = 2.6 Deshayes 1088; Erkanal 1977, 3 entry 1, pl 11 Ax, trunnion/lugged Carpentry/masonry Settlement 11.8 cm 8 cm Erkanal 1977, 3 entry 3, pl 1.3; Deshayes 1089; S. Przeworski 1935, p. 409, fig 1, b Ax, trunnion/lugged Carpentry/masonry Settlement 14 cm 5.3 cm Erkanal 1977, 3 entry 2, pl 1.2; Deshayes 1090; Kultepe 1949, p. 195, n. 277, pl. LIV, 512 Ax, trunnion/lugged Carpentry/masonry Settlement 15.5 4 Erkanal 1977, 5 entry 17, pl 2.17; Chantre, Cappadoce 79, fig 58 Ax, trunnion/lugged Karum Kanesh IB Carpentry/masonry Settlement 13.3 2.4 Erkanal 1977, 7 entry 39, pl 3.39 Ax, shaft hole Karum Kanesh II Carpentry/masonry Burial 10.3 cm 3.2 cm Erkanal 1977, 18 entry 64, pl 6.64; otherwise unpublished... Ax, shaft hole 1800 BC Carpentry/masonry Settlement Deshayes 1574, AfO, XVI (1952-53), p. 150, fig. 15 Ax, shaft hole Karum Kanesh Ib, start of 2nd Carpentry/masonry millennium Burial 13.8 cm 6 Deshayes 1513; Erkanal 1977, 15, entry 59, pl 5.59; Belleten XIX (1955), p. 69, fig 40, a, b; 42 Ax, shaft hole Carpentry/masonry Settlement Deshayes 1418; AA 1940, col. 580, fig 12; Met. Anat. P. 34, pl. X,1 Ax, shaft hole Carpentry/masonry Settlement 20.5 cm ce = 7.8 ERkanal 1977, 18 entry 65, pl 6.65; Przeworski Metallindustrie 120 pl 10.1; could this be the same object as Deshayes Ax, single/flat 18th century BC; level Ib Carpentry/masonry Settlement Deshayes 501; Belleten XIX (1955), p. 78, fig 4,a and 17 Ax, shaft hole, fenestrated Carpentry/masonry Settlement 10 cm 10.2 cm Erkanal 1977, 22 entry 69 pl 6.69; Özgüç, Kultepe-Kanish 109ff, fig 64, pl 49.1 Ax, shaft hole frag Karum Kanish level II Carpentry/masonry Workshop Müller-Karpe 1994, 52; Özgüc 1986, 48 Ax, trunnion/lugged MB? Carpentry/masonry Settlement 13.5 cm 8.8 cm Erkanal 1977, 6 entry 32 pl 3.32; Cantre, Cappadoce 79, fig 59 Blade, flanged 18th century BC; level Ib Utilitarian Settlement Deshayes 1087; Kultepe 1949, p. 195, pl. LVI, 572 Chisel Kultepe, Karum IB Carpentry/masonry Settlement 6 ce = 1 Müller-Karpe 1994, 228, pl 65.4; Özgüç 1953, 195ff, pl 56, Ktb/k/559/35 Chisel 18th century BC; level Ib Carpentry/masonry Settlement Deshayes 976; Kultepe 1949, p. 195, pl. LVI, 557 Chisel, socketed MB? Carpentry/masonry Burial? 4.6 ce = 1 Müller-Karpe 1994, 245 pl 75.5; Özgüç and Özgüç 1953, 68, 195, pl 56, Ktb/K 547 (296), Esin 1969, 138, 170, #6801, typ Double Ax level II; 19th century; Karum Kanish Carpentry/masonry level II Burial 16.9 ce = 1.8 and 1.85 Deshayes 2081; Erkanal 1977, 21, entry 66 pl 6.66; Belleten XIX (1955), p. 70, fig 41, a.b., 43 Knife 18th century; level IB Utilitarian Settlement Deshayes 2421; Kultepe 1949, p. 195, pl. LVI, fig. 553 and 554 Mold for Ax, chisel 18th century BC; Karum Kanesh Metallurgical Ib Workshop 27.5 14.7 Erkanal 1977, 3 entry 4, pl 1.4; Deshayes 1086, Özgüç 2003, 246, fig 258; Müller-Karpe 1994, 203 pl 31.1 Mold for lugged Axs Karum Kanesh IB Metallurgical Workshop, 1 8.2 9.6 Erkanal 1977, 3 entry 5, pl 1.5; Müller-Karpe 1994, 204 pl 33.2 Mold Karum level Ib Metallurgical Workshop Özgüç 2003 249, fig 266 Mold Karum level IB Metallurgical Settlement 9 6 Müller-Karpe 1994, 198 pl 16.5; Özgüç 1986, 45 pl 92.3 Mold for round ingot Karum Level II Metallurgical Workshop, 7 9.9 3.3 Müller-Karpe 1994, 199 pl 20.4; Özgüç 1986,41 pl 86.3 Mold for round ingot Karum level II Metallurgical Workshop, 7 8.9 8.2 Müller-Karpe 1994, 200 pl 20.6 Mold for bars, blade Karum level IB Metallurgical Settlement 10.5 7.4 Müller-Karpe 1994, 200, pl 21.2; Özgüç 1986, 45 pl 91, 7a.b. Mold for long chisel Karum level IB Metallurgical Settlement 29 17.5 Müller-Karpe 1994, 201 pl 25.2; Özgüç 1986 45 pl 91.3 Mold, multi-sided Karum level Ib Metallurgical Workshop, 1 11.4 9.4 Müller-Karpe 1994, 203-204, pl 31.3; Özgüç 1955, fig 6 a,c; 1986, 39 pl 80, 3.8 Mold for multiple objects Karum level II Metallurgical Settlement 7.7 4.5 Müller-Karpe 1994, 203 pl 31.2; Özgüç 1986, 38 pl 79.10 Mold for rasp/ file MBA? Metallurgical Settlement Müller-Karpe 1994, 205 pl 35.1; Özgüç 1986 44 pl 90.6 Mold for rasp/ file Metallurgical Settlement 16.5 5.2 Müller-Karpe 1994, 205 pl 35.2; Özgüç 1986, 45 pl 91, 1a.b Mold for rasp/ file MBA; Karum level II Metallurgical Settlement 28.2 10.6 Müller-Karpe 1994, 205, pl 35.4; Özgüç 1986, 44 pl 90, 5a-d Mold Metallurgical Workshop, 1 8.5 6.9 Müller-Karpe 1994, 206 pl 37.1 Mold for bars Karum level Ib Metallurgical Workshop, 1 9.3 6.7 Müller-Karpe 1994, 206, pl 37.3; Özgüç 1986, 45 pl 92.4 Mold Karum level II Metallurgical Workshop, 7 13 9.75 Müller-Karpe 1994, 206 pl 38.3; Özgüçh 1986, 42 pl 86.4 Mold Karum level II Metallurgical Workshop, 7 14.6 9.9 Müller-Karpe 1994, 207 pl 38.4; Özgüç 1986, 42 pl 86.5 Mold Karum level II Metallurgical Workshop, 7 11.7 6.2 Müller-Karpe 1994, 207 pl 38.5; Özgüç 1986, 42 Mold Karum level II Metallurgical Workshop, 7 12.8 8.7 Müller-Karpe 1994, 207 pl 38.6; Özgüç 1986, 42 pl 86.6 Mold Karum Metallurgical Settlement 8.7 5.8 Müller-Karpe 1994, 207 pl 39.1 Mold Metallurgical Settlement 6.3 5.3 Müller-Karpe 1994, 207 pl 39.3 Mold MBA; Karum level IB Metallurgical Workshop, 1 15.4 9.3 Müller-Karpe 1994, 207 pl 39.6; Özgüç 1955, fig 7, 1986, 39 pl 80.5 Mold Metallurgical Settlement 12.4 11.7 Müller-Karpe 1994, 208 pl 40.7 Mold for shaft hole Ax Karum level IB Metallurgical Settlement 16.8 7 Müller-Karpe 1994, 209 pl 44.1; Özgüç 1986, 43 pl 89, 1, 91, 4-6, 92.2 Mold for shaft hole Ax Karum level II Metallurgical Settlement 21.9 9.15 Müller-Karpe 1994, 210 pl 45.1; Özgüç 1986, 43 pl 88.8 b Mold for shaft hole Ax Karum level II Metallurgical Workshop, 7 16 8.65 Müller-Karpe 1994, 210 pl 45.4; Özgüç 1986, 42 pl 87.1 Mold Metallurgical Settlement 7.8 5.9 Müller-Karpe 1994, 210 pl 46.1 ANATOLIA TOOLS 644
Sites & Object types Specific object date Tool type category Context L W Bibliography Mold for shaft hole Ax Karum level II Metallurgical Workshop, 7 9.3 4.5 Müller-Karpe 1994, 210 pl 46.2; Özgüç 1986 42 pl 87.3a Mold for shaft hole Ax Karum level II Metallurgical Workshop, 7 Müller-Karpe 1994, 210 pl 46.3; Özgüç 1986, 42 pl 87, 3b Mold for double Ax Karum level II Metallurgical Settlement 19.5 4.45 Müller-Karpe 1994, 211 pl 48.3 Mold for fenestrate Ax Level II Metallurgical Workshop, 7 11.2 6.5 Müller-Karpe 1994, 211 pl 48.6; Özgüç 1986, 41 pl 86.2 Mold for weapons Level II Metallurgical Workshop, 7 Müller-Karpe 1994, 212 pl 50.1,2; Özgüç 1986, 42 pl 87.2 Mold for lugged Ax Metallurgical Workshop, 1 11.65 9.1 Müller-Karpe 1994, 212 pl 50.3; Özgüç 1986 39 pl 80, 4.6 Mold for ornament Karum level IB Metallurgical Settlement 7.55 6.5 Müller-Karpe 1994, 213 pl 51.1; Özgüç 1986, 45 pl 92.1 Mold for ornament MBA; Karum level Ib Metallurgical Workshop, 1 11 7 Müller-Karpe 1994, 215, pl 53.8; Özgüç 1955, fig 8; 1986, 39 pl 80.7 Mold for ornament MBA; Karum level Ib Metallurgical Workshop, 1 11.5 7.5 Müller-Karpe 1994, 215, pl 53.9; Özgüç 1955, fig 8; 1986, 39 pl 80.7 Mold for ring ornament, 2 sided MBA Metallurgical Settlement 5.4 4.75 Müller-Karpe 1994, 215 pl 54.2 Mold for ornament Level II Metallurgical Settlement 9 4.5 Müller-Karpe 1994, 216-7 pl 55.2; Özgüç 1950, 130f, 142ff, 205, pl 65, 408; Özgüç 1986, 45 Mold for ornament Level II Metallurgical Workshop, 1 5.3 4.65 Müller-Karpe 1994, 217 pl 55.3; Özgüç 1986, 42 pl 87.4 Mold for ornament MBA Metallurgical Settlement 3.1 3.6 Müller-Karpe 1994, 217 pl 55.7 one half5/6/2011 Özgüç 1955, 449 fig 22; 1986, 45 pl 91.9 Mold for ornament MBA Metallurgical Settlement 8.8 4.8 Müller-Karpe 1994, 217 pl 55.8 second half; Özgüç 1955, 449 fig 22; 1986, 45 pl 91.9 Mold for small objects Karum level IB Metallurgical Settlement 3.67 1.75 Müller-Karpe 1994, 220 pl 58.1; Özgüç 1986, 45, pl 91.8 Mold Karum level II Metallurgical Workshop, 7 8 3.6 Müller-Karpe 1994, 220, pl 58.2; Özgüç 1986, 42, pl 87.5 Mold for cup? MBA, level II Metallurgical Workshop, 7 3.9 3.4 Müller-Karpe 1994, 220 pl 58.4; Özgüç 1986, 42, pl 91.11 Mold for Ax Level Ib Metallurgical Settlement 7.6 4.9 Müller-Karpe 1994, 220, pl 58.7; Özgüç 1983, 425 pl 87.2 Mold Karum level II Metallurgical Workshop, 7 Müller-Karpe 1994, 221, pl 58.8,9; Özgüç 1986, 42 pl 88.6 Kültepe Level II Metallurgical Workshop, 7 4.1 3.65 Müller-Karpe 1994, 221 pl 59.1; Oxguc 1986, 42 pl 88.1 Mold for ornament Karum level II Metallurgical Workshop, 7 3.5 3.45 Müller-Karpe 1994, 221 pl 59.3; Özgüç 1986, 42 pl 88.2 Mold for ornament Karum Metallurgical Settlement 5.3 4.2 Müller-Karpe 1994, pl 59.5 Mold for lead figurines Level Ib Metallurgical Settlement 6.6 4.3 Müller-Karpe 1994, 221 pl 60.1; Özgüç 1986, 89f; pl 79.11 Mold for lead figurines Level 1b Metallurgical Settlement 6.2 5 Müller-Karpe 1994, 221-222, pl 60.2 ; Emre 1971, 28 pl 6.3 Mold for lead figurines Level Ib Metallurgical Settlement 6.2 5.5 Müller-Karpe 1994, 222 pl 60.3; Emre 1971, 28, 69 fig 28, pl 9.1 Mold for lead figurines Karum level Ib Metallurgical Workshop, 1 6 4.4 Müller-Karpe 1994, 222 pl 60.5; Emre 1971, 29 pl 8.1 Mold for lead figurines MBA, level II Metallurgical Settlement 5.9 4.6 Müller-Karpe 1994, 222 pl 60.10; Özgüç 1950, 129; Emre 1971, 16, 26 pl 4.2 Mold for lead figurines Metallurgical Workshop, 5 7.7 5.2 Müller-Karpe 1994, 222 pl 60.11; Emre 1971, 159f, pl 15.1 Mold for lead figurines Karum level IB Metallurgical Workshop, 6 9.1 4.9 Müller-Karpe 1994, 223 pl 60.12; Özgüç 1959 52f; Emre 1971, 16f, 27f, pl 9.2 Mold for shaft hole Ax? Karum level II Metallurgical Workshop, 7 21 9.5 Müller-Karpe 1994, 208 pl 41.2; Özgüç 1986, 41 pl 86.1 Mold for shaft hole Ax? Karum level Ib Metallurgical Settlement 16.8 7.8 Müller-Karpe 1994, 210 pl 45.2; Özgüç 1986, 88 pl 134.2 Mold for fenestrate Ax Level II Metallurgical Workshop 13 11 Müller-Karpe 1994, 211 pl 48.5; Özgüç 1986, 44 pl 89.4, 90.1 Sickle Kültepe - LBA Karum Kanish level II Agricultural Workshop, 7 Müller-Karpe 1994, 52, pl 84.18 Ax, shaft hole Kültepe - 2nd millennium End of 2nd millenium BC Carpentry/masonry Settlement Deshayes 1792; AA 1940, col. 580, fig 11 Mold for lead figurines surface find Metallurgical Settlement 5.3 3.2 Müller-Karpe 1994, 222 pl 60.4; Emre 1971, 29 fig 22; pl 7.2 Mold for lead figurines Metallurgical Settlement 6.1 4.7 Müller-Karpe 1994, 222 pl 60.7; Emre 1971, 37 pl 11.1 Mold for lead figurines Kuşaklı - MBA Metallurgical Unstratified or unknown 6 4.2 Müller-Karpe 1994, 222 pl 60.9; Emre 1971, 37 pl 11.4 Knife Kuşaklı - LBA Hittite Old Kingdom period Utilitarian Settlement Yildirim and Gates 2007, AJA 111, 299 Chisel, socketed Hittite empire period Carpentry/masonry Settlement, nw gate 21 1.6 Müller-Karpe 2004, MDOG 136, fig 12 Knife Hittite empire period Utilitarian Settlement, se gate 13.5 Müller-Karpe et al. 1999, 131, 78 fig 17a; Müller-Karpe 2004 MDOG 136, 154 Knife Hittite empire period Utilitarian Settlement, east city wall 8.5 cm Müller-Karpe et al. 1999, 131, pg 78 fig 17b Mold Metallurgical Settlement Müller-Karpe 1994, 73 fig 4. Mold Metallurgical Settlement Müller-Karpe Mold Metallurgical Settlement Müller-Karpe Mold Metallurgical Settlement Müller-Karpe ANATOLIA TOOLS 645
Page 1:
Middle and Late Bronze Age Metal To
Page 4 and 5:
investigation of the carpentry/maso
Page 6 and 7:
Volume 1 CHAPTER 1: TABLE OF CONTEN
Page 8 and 9:
Sites from the Greek islands 202 Si
Page 10 and 11:
LIST OF TABLES Table 4.1: Shaft-hol
Page 12 and 13:
Figure 3.12: Distribution of metall
Page 14 and 15:
Figure 4.28: Map showing MBA carpen
Page 16 and 17:
Plate 4.33: Double adze from Enkomi
Page 18 and 19:
Plate 5.29: Orchomenos tool kit, Ch
Page 20 and 21:
Several fellowships provided financ
Page 22 and 23:
administrative staff at the college
Page 24 and 25:
MBA 2000- 1600 LBA 1600- 1050 CHRON
Page 26 and 27:
in the Aegean. 2 Small copper imple
Page 28 and 29:
een easier with metal tools than st
Page 30 and 31:
extremely scarce and the dearth of
Page 32 and 33:
extraordinary number of metal tools
Page 34 and 35:
this observation is astonishing sin
Page 36 and 37:
Danube (IVe au IIe millénaire). Wh
Page 38 and 39:
Mycenaean tool repertoire, yet some
Page 40 and 41:
Chapter 2: Avenues for metallurgica
Page 42 and 43:
cited as evidence for metallurgical
Page 44 and 45:
ecycled items. Final products like
Page 46 and 47:
ich published dataset, only a few s
Page 48 and 49:
Quantities of raw metal were widely
Page 50 and 51:
Turkey. Upon touring these sites, i
Page 52 and 53:
The method for interpreting data fr
Page 54 and 55:
second millennium BC. Such cases ar
Page 56 and 57:
study area (from Cyprus), and its i
Page 58 and 59:
are sufficiently differentiated fro
Page 60 and 61:
his reconsideration of third millen
Page 62 and 63:
to Catling, a violent purpose for t
Page 64 and 65:
Different tool names may imply diss
Page 66 and 67:
chisels. Categories 2 and 4 occur f
Page 68 and 69:
detail for the carpentry/masonry to
Page 70 and 71:
Isthmia region throughout the histo
Page 72 and 73:
Gender responsibilities are investi
Page 74 and 75:
Chapter 3: Metal tools in the secon
Page 76 and 77:
double adze from the Enkomi Gunnis
Page 78 and 79:
The link between a craftsperson and
Page 80 and 81:
specialized and intended for specif
Page 82 and 83:
III: The relationship of stone, bon
Page 84 and 85:
durability. Stone cutting objects b
Page 86 and 87:
information together. In the Aegean
Page 88 and 89:
In addition to greater amounts of t
Page 90 and 91:
y region may reflect social and cra
Page 92 and 93:
database entries whose contextual c
Page 94 and 95:
accurately account for the internal
Page 96 and 97:
given to stockpiled tools. Thirty-f
Page 98 and 99:
the larger and stronger metal types
Page 100 and 101:
hoes/plowshares were preferred in b
Page 102 and 103:
ather than a shipwreck. 165 Yet, li
Page 104 and 105:
ideograms. 173 The Linear B ideogra
Page 106 and 107:
The relative absence of Aegean digg
Page 108 and 109:
goods were redistributed in two dis
Page 110 and 111:
Bronze Age Mediterranean climate is
Page 112 and 113:
frequency of these tools, however,
Page 114 and 115:
mandated a striking implement. Wood
Page 116 and 117:
patterns occur despite the fact tha
Page 118 and 119:
is even more striking when compared
Page 120 and 121:
quantities, actual smiths are menti
Page 122 and 123:
The presence of metallurgical tools
Page 124 and 125:
metal smiths moved throughout the l
Page 126 and 127:
Site size and contextual analysis s
Page 128 and 129:
is significant, as both regions wer
Page 130 and 131:
the prominent LBA object type (53.6
Page 132 and 133:
cannot always aid functional interp
Page 134 and 135:
due in large part to 1) palatial li
Page 136 and 137:
punches, borers, undefined implemen
Page 138 and 139:
include bandages, pack-saddles, rei
Page 140 and 141:
egion. The proportions of carpentry
Page 142 and 143:
instruments during the course of th
Page 144 and 145:
Cretan patterns (Fig. 3.31a): The r
Page 146 and 147:
Despite the greater tool diversity,
Page 148 and 149:
Syria-Palestine. The status of the
Page 150 and 151:
distribution, as the category is qu
Page 152 and 153:
differences in the consumption of t
Page 154 and 155:
comparable to modern rulers and tap
Page 156 and 157:
probably influenced from the east,
Page 158 and 159:
Palestine and Anatolia. There are n
Page 160 and 161:
4.2). 316 Similar blades are known
Page 162 and 163:
part of a metal hoard that was stas
Page 164 and 165:
Whether the double ax was an implem
Page 166 and 167:
few select palaces (e.g. Mycenae, A
Page 168 and 169:
specimens (Evely’s Type 4 lists s
Page 170 and 171:
conveys how chisels, single axes, s
Page 172 and 173:
functional differences. An implemen
Page 174 and 175:
The tool type is common in Anatolia
Page 176 and 177:
their size alone (Fig. 4.4), and th
Page 178 and 179:
mortuary contexts, thus confirming
Page 180 and 181:
were incorporated into double-ended
Page 182 and 183:
Phornou Korifi, Myrtos, and Ayia Ph
Page 184 and 185:
Size 1 (0.5 cm or less) Size 2 (0.6
Page 186 and 187:
carving out deep mortises in wooden
Page 188 and 189:
Mycenaean and Cypriot contexts, whi
Page 190 and 191:
the socket may be that a wooden sha
Page 192 and 193:
worn and battered from use; this da
Page 194 and 195:
the early 12 th century: “It may
Page 196 and 197:
Syria-Palestine 2 - 2 - Shipwrecks
Page 198 and 199:
of shafted double hammers is also f
Page 200 and 201:
in the Brunnen 212 hoard was conver
Page 202 and 203:
mainland and may have aided drillin
Page 204 and 205:
The tubular drill was first devised
Page 206 and 207:
siderópetra (hard limestone known
Page 208 and 209:
egularly considered to be absent fr
Page 210 and 211:
together two sides of a handle, a f
Page 212 and 213:
implement, it was employed from tim
Page 214 and 215:
70 percent of the catalogue (79 out
Page 216 and 217:
3. Saws with a straight blade top a
Page 218 and 219:
ounded tip end with teeth (Plate 4.
Page 220 and 221:
consumer. Cretan carpentry/masonry
Page 222 and 223:
and Knossos, seemingly reflecting t
Page 224 and 225:
Ayia Marina 1 1 chisel Gona (Macedo
Page 226 and 227:
Ithaka-Polis 3 - 3 - 1 single/flat
Page 228 and 229:
are reported from Ayia Irini, altho
Page 230 and 231:
the island in the MBA. The distribu
Page 232 and 233:
MBA site Total carpentry - masonry
Page 234 and 235:
eported here. Despite this caveat,
Page 236 and 237:
MBA site Total carpentry - masonry
Page 238 and 239:
4.21). Minoan double axes and saws
Page 240 and 241:
diameters are 5 cm and greater) mus
Page 242 and 243:
(like Minoan types) as opposed to t
Page 244 and 245:
Although traces of Anatolian or Ana
Page 246 and 247:
common to Crete and Cyprus. The sin
Page 248 and 249:
double ax forms, implies that the c
Page 250 and 251:
carpentry/masonry tools contribute
Page 252 and 253:
organized.” 530 My assertion rega
Page 254 and 255:
type of diversity that may mark a t
Page 256 and 257:
of fragmentation practices restrict
Page 258 and 259:
final stage of the metal working: t
Page 260 and 261:
shaped razor. 545 A similar collect
Page 262 and 263:
workshops were easier to identify i
Page 264 and 265:
definition of a hoard as “a group
Page 266 and 267:
some hoards contained thousands of
Page 268 and 269:
Discerning founders’ hoards from
Page 270 and 271:
most assemblages were destined for
Page 272 and 273:
often selected according to certain
Page 274 and 275:
economic approach to hoarding must
Page 276 and 277:
lacks contextual information or chr
Page 278 and 279:
of objects from Mochlos also produc
Page 280 and 281:
unrelated objects; and 3) the tradi
Page 282 and 283:
as rare. Only two Cretan hoards con
Page 284 and 285:
of comparison, there are 87 double
Page 286 and 287:
data coded in this manner, it becam
Page 288 and 289:
The similarity of the Tiryns hoard
Page 290 and 291:
axes, and drills. Awls/engravers an
Page 292 and 293:
functional interpretation of that a
Page 294 and 295:
e-casting metal, which required hot
Page 296 and 297:
524) has shaft-hole sidewalls of di
Page 298 and 299:
were consciously formed and likely
Page 300 and 301:
saws, ax-adzes, a broad chisel, dou
Page 302 and 303:
oxhide ingot fragments and metallur
Page 304 and 305:
metallurgical and agricultural tool
Page 306 and 307:
Tsountas (Mycenae), Kalydon-Psoroli
Page 308 and 309:
Carpentry or masonry utensils repre
Page 310 and 311:
stone-working tools included sixtee
Page 312 and 313:
tools. One has a wide, deformed ham
Page 314 and 315:
tool kit). Diversity is a hallmark
Page 316 and 317:
V. The metal objects from shipwreck
Page 318 and 319:
Tool or object Uluburun (total 65+)
Page 320 and 321:
occurrence is a definite sign of a
Page 322 and 323:
implements in one context comes fro
Page 324 and 325:
Foundry and Sinda hoards, but other
Page 326 and 327:
tool distribution patterns in hoard
Page 328 and 329:
only sporadically in burials and wo
Page 330 and 331:
combination adze forms (double adze
Page 332 and 333:
produced a monograph specifically o
Page 334 and 335:
are currently in progress and will
Page 336 and 337:
thriving metallurgical and craft in
Page 338 and 339:
of Middle Cypriot tools, however, i
Page 340 and 341:
number of utilitarian and small cra
Page 342 and 343:
extremely limited in comparison to
Page 344 and 345:
metallurgical operations are plenti
Page 346 and 347:
absent. 758 The Linear B tablets at
Page 348 and 349:
The Cypriot copper industry reached
Page 350 and 351:
implements comprise 45% of the regi
Page 352 and 353:
the preferences commonly found with
Page 354 and 355:
possible that merchants, metal smit
Page 356 and 357:
Syria-Palestine is not accidental,
Page 358 and 359:
specifically adze variations (e.g.
Page 360 and 361:
likelihood, these implements were u
Page 362 and 363:
Two elongated chisels from Mycenae
Page 364 and 365:
cutting edges wider than the object
Page 366 and 367:
are collectively known from Crete a
Page 368 and 369:
The distribution of shaft-hole axes
Page 370 and 371:
this form are unknown in the Aegean
Page 372 and 373:
artisans trained in a Minoan style?
Page 374 and 375:
transfer of painted plaster moved f
Page 376 and 377:
producing and consuming metal tools
Page 378 and 379:
the Argolid acquired specialized Hi
Page 380 and 381:
traveled from region to region prac
Page 382 and 383:
A complete study of metal tools req
Page 384 and 385:
Dissertation Bibliography Agouridis
Page 386 and 387:
BC, edited by A. B. Knapp. Altamont
Page 388 and 389:
Austin: Université de Liège; Univ
Page 390 and 391:
Calder, W. M., and D. A. Traill, ed
Page 392 and 393:
Cline, E., and A. Yasur-Landau. 200
Page 394 and 395:
des maisons et quartiers d'habitati
Page 396 and 397:
Ellis, R. S. 1968. Foundation Depos
Page 398 and 399:
Gale, N. H., and Z. A. Stos-Gale. 1
Page 400 and 401:
Laffineur and P. P. Betancourt. Li
Page 402 and 403:
Homerica, edited by H.-G. Buchholz
Page 404 and 405:
Marinatos. Stockholm: Svenska Insti
Page 406 and 407:
———. 2004. Wheat, Barley, Flo
Page 408 and 409:
London, G. A. 2002. Women Potters a
Page 410 and 411:
33: 61-87. Moran, W. L., ed. 1992.
Page 412 and 413:
Nebelsick, L. 2000. Rent Asunder: R
Page 414 and 415:
Oldest Capital City of the Hittites
Page 416 and 417:
Poursat, J.-C. 1978. Travaux de L'
Page 418 and 419:
Ruscillo, D. 2006. Catalogue of Mis
Page 420 and 421:
———. 2006a. Catalogue of Misc
Page 422 and 423:
Stewart, J. 1961. The Early Bronze
Page 424 and 425:
Metallurgy in the Bronze Age. Proce
Page 426 and 427:
Walberg, G. 1998. Excavations on th
Page 428 and 429:
Seventh International Symposium at
Page 430 and 431:
Volume 2 APPENDIX 1: Figures (diagr
Page 432 and 433:
Total quantity 2000 1500 1000 500 0
Page 434 and 435:
Carpentry/ masonry 2253 (42.4%) Fig
Page 436 and 437:
Figure 3.5b - Agricultural tools: q
Page 438 and 439:
Figure 3.9d - Cyprus LBA quantities
Page 440 and 441:
Medium, 67 Figure 3.11 - Distributi
Page 442 and 443:
Billet = 1 Mold = 1 Wedge, socketed
Page 444 and 445:
Percentage 80 70 60 50 40 30 20 10
Page 446 and 447:
Quantity Quantity 1400 1200 1000 80
Page 448 and 449:
2 nd mill. (n=17) Spatula/scraper =
Page 450 and 451:
General 2 nd millennium (n=20) Knif
Page 452 and 453:
Total quantity 400 300 200 100 0 17
Page 454 and 455:
Figure 3.26b: Carpentry/Masonry too
Page 456 and 457:
Single/flat ax (n=370) 185 (40.7%)
Page 458 and 459:
General 2 nd millennium (n=21) Sing
Page 460 and 461:
General 2 nd millennium (n=89) Shaf
Page 462 and 463:
Figure 4.1: Shaft-hole axes: region
Page 464 and 465:
Figure 4.2: Doubles axes: regional
Page 466 and 467:
Cutting edge width (cm) 12 10 8 6 4
Page 468 and 469:
Tool series N Mean of ratio Standar
Page 470 and 471:
Figure 4.7: Single/flat axes: regio
Page 472 and 473:
Cutting edge width (cm) 8 7 6 5 4 3
Page 474 and 475:
Figure 4.10: Chisels: Scatter plots
Page 476 and 477:
Cutting edge width (cm) 7 6 5 4 3 2
Page 478 and 479:
Chisels by size Number Ratio Mean S
Page 480 and 481:
Cutting edge width (cm) 3 2.5 2 1.5
Page 482 and 483:
Figure 4.17: Ax-adzes: regions meas
Page 484 and 485:
Figure 4.19: Hollow cylindrical met
Page 486 and 487:
Figure 4.20 continued: Saw measurem
Page 488 and 489:
G,1 (30) F3, (2) F2, (2) E2, (2) E1
Page 490 and 491:
F3, (7) F2, (9) F1, (11) G1, (37) E
Page 492 and 493:
F2, (2) F3, (1) G1, (4) E1, (27) E2
Page 494 and 495:
1-5 6-15 16-30 31-50 51-100 100 + S
Page 496 and 497:
Figure 5.1: Tool frequencies and di
Page 498 and 499:
Figure 5.2 continued - Hoards from
Page 500 and 501:
Figure 5.3 continued - Hoards from
Page 502 and 503:
Hoards: 1 - 13 are from Crete 1: Sa
Page 509 and 510:
40 51 19 38 34 45 48 33 36 46 28 29
Page 511 and 512:
Proximity Matrix for the tool types
Page 513 and 514:
Narrow chisel Flat/single ax Shaft-
Page 515 and 516:
Plate 4.3: Shaft-hole ax from Cypru
Page 517 and 518:
Plate 4.9: Andronianoi (Euboea) dou
Page 519 and 520:
Plate 4.15 Single/flat ax from Kata
Page 521 and 522:
Plate 4.22: Chisel of size 3; Enkom
Page 523 and 524:
Plate 4.33: Double adze: from the G
Page 525 and 526:
Plate 4.39: Trésor de Bronzes adze
Page 527 and 528:
Plate 4.47: Saw type 3: Boğazköy-
Page 529 and 530:
Plate 5.1: Katamachi hoard - Ioanni
Page 531 and 532:
Plate 5.7: MX 541 - Double or singl
Page 533 and 534:
Plate 5.13: Chisel fragment; MX 519
Page 535 and 536:
Tsountas hoard, double axes 9 doubl
Page 537 and 538:
Plate 5.23: Double ax fragment-Anth
Page 539 and 540:
Plate 5.27: Enkomi Gunnis Hoard - (
Page 541 and 542:
L: hammer-adze R: double adze fragm
Page 543 and 544:
Appendix 3: Second Millennium BC Me
Page 545 and 546:
Carpentry/masonry tools 1 total: 1
Page 547 and 548:
Tool count and frequency 4 (14.3%)
Page 549 and 550:
Other objects 2 awls, 1 large scrap
Page 551 and 552:
Tool count and frequency 4 (44.4%)
Page 553 and 554:
15 th -14 th century: LH II - IIIA1
Page 555 and 556:
Other objects 1 bronze weight with
Page 557 and 558:
Likelihood of hoard Definite 46. Gr
Page 559 and 560:
Nicosia, Cyprus Museum (inv. Enkomi
Page 561 and 562:
Bibliography Taylor 1957, 20, 86-90
Page 563 and 564:
(…/1520.12,13,14,15); 18 castings
Page 565 and 566:
cauldron fragments), 1 ingot fragme
Page 567 and 568:
Other objects 45 sickles, 3 swords,
Page 569 and 570:
Context and date of 46.3, 47.1-4 Pi
Page 571 and 572:
Sites & Object types Specific date
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
Page 589 and 590:
Page 591 and 592:
Page 593 and 594:
Page 595 and 596:
Sites & Object types Specific objec
Page 597 and 598:
Page 599 and 600:
Page 601 and 602:
Page 603 and 604:
Sites & Object types Lefkas: genera
Page 605 and 606:
Page 607 and 608:
Page 609 and 610:
Page 611 and 612:
Page 613 and 614:
Page 615 and 616:
Page 617 and 618: Sites & Object types Specific objec
Page 621 and 622: Sites & Object types Specific perio
Page 667: Sites & Object types Specific objec
Page 691: Sites & Object types Specific perio
show all

Middle and Late Bronze Age Metal Tools from the Aegean, Eastern ...

Create successful ePaper yourself

Delete template?

Save as template?