1440 18" Lav/Toilet - Suicide Resistant Comby - Acorn Engineering

®
Penal-Ware 1440 Series
18" Lav/Toilet - Suicide Resistant Comby
Fixture May Show Some Available Options
18" Lav/Toilet - Suicide Resistant Comby
Fixture is arranged to be installed on finished wall and serviced from an accessible pipe chase. Fixture is fabricated from
14 gage type 304 stainless steel cabinet and toilet bowl, polished to a satin finish. The inside of the toilet bowl also has a
satin finish. Cabinet interior is sound-deadened with fire-resistant material. Optional Wall Sleeve or Metal Template is
recommended for all installations to provide required wall openings. This unit is intended to reduce any possible risk of
the fixture being used as a suicide device.
Lavatory "D" Bowl is 15" x 13" x 5-1/2" deep. Standard elbow waste outlet is 1-1/2" O.D. plain end.
Optional Valve may be an Air-Control pneumatically operated, pushbutton valve using atmospheric air. Pushbutton
requires less than 5 pounds to activate valve. Valve is direct acting, non-metering type and is optionally available as
metering with non-hold open feature. Metering valve timing is adjustable from 5 to 60 seconds. Valve can be remotely
located up to 10 feet from the operating pushbutton. Bubbler and valve pushbuttons are spherical type and do not
include straight edges. Valve and bubbler conform with lead free requirements for NSF61, section 9, 1997 and CHSC
116875.
Toilet is blowout jet type with elongated bowl manufactured to ASME A112.19.3-2008 and CSA B45.4-2008
requirements and will flush with a minimum of 25 PSI flow pressure when used in conjunction with a minimum of 1.6
GPF. Trap has minimum 3-1/2" seal and will pass a 2-1/8" ball. Toilet waste outlet is 2-3/8" diameter plain end extending
3" beyond the fixture for wall outlet and Gasketed Waste for floor outlet.
GUIDE SPECIFICATION
1440-2-CT-BPH-04
Please visit www.acorneng.com for most current specifications.
Provide and install Acorn Penal-Ware 18" wide Lav/Toilet Suicide Resistant Comby (Specify model number and options).
Provide hemispherical cabinet design to reduce risk of fixture being used as a suicide device. Fixture shall be fabricated
from type 304 stainless steel. Construction shall be seamless welded and exposed surfaces shall have a satin finish.
Provide D shape lavatory bowl. Fixture shall have an Air-Control pneumatically operated, pushbutton valve. Valve shall
require less than 5 pounds to activate. Valve and bubbler conform with lead free requirements for NSF61, section 9,
1997 and CHSC 116875. Provide –BPH Hemispherical Penal Bubbler and –PBH Hemispherical Penal Pushbutton. Provide
toilet bowl housing to prohibit the attachment of objects. Toilet shall be concealed blowout jet type with an elongated
bowl, self-draining flushing rim, and an integral contoured seat. Toilet shall meet ASME A112.19.3-2008 and CSA
B45.4-2008 requirements and will flush with a minimum of 25 PSI flow pressure when used in conjunction with a
minimum of 1.6 GPF. Toilet trap shall have a minimum 3-1/2" seal that shall pass a 2-1/8" diameter ball and shall be fully
enclosed. Cabinet interior shall be sound-deadened with fire-resistant material. Fixture shall withstand loading of 5,000
pounds without permanent damage. Fixture shall be furnished with necessary fasteners for proper installation.
Page 1 P.1440
Revised: 01/23/13
Acorn Engineering Company • 15125 Proctor Avenue • P.O. Box 3527 • City of Industry, CA 91744-0527 U.S.A.
Tel: (800) 488-8999 • (626) 336-4561 • Fax: (626) 961-2200 • www.acorneng.com • E-mail: info@acorneng.com

®
Penal-Ware 1440: 18" Lav/Toilet - Suicide Resistant Comby
WALL THICKNESS AND TYPE (Must Specify)
Thickness: ___________ Type: o Concrete o Block o Steel
MODEL AND OPTIONS SELECTION:
BASE MODEL NUMBER
o 31440
18" Lav/Toilet - Suicide Resistant Comby
TOILET ORIENTATION (Must Specify)
o -AL Angled Left
o -AR Angled Right
o -CT Centered Toilet
FIXTURE MOUNTING AND WASTE (Must Specify)
o -2 On-Floor, Wall Outlet
o -3 On-Floor, Floor Outlet
BUBBLER SELECTION (Must Specify)
o -BPH Hemispherical Penal Bubbler
VALVE SELECTION (Must Specify)
o -03 Air-Control, Single Temp, Non-Metering
o -03-M Air-Control, Single Temp, Metering
o -04 Air-Control, H & C, Non-Metering
o -04-M Air-Control, H & C, Metering
q -9 Punched for Valve by Others (Specify Punching)
q -EVS1 Electronic Valve System - Single Temp
o -EVSP1 Electronic Valve Sys. w/ Piezo Pushbutton
o -EVS2 Electronic Valve System - Hot & Cold
o -EVSP2 Electronic Valve Sys. w/ Piezo Pushbuttons
o -MA Manifolded Valve o 2 o 3 o 4
o -MH Metering, Hot Side Only
o -MVC1 Time-Trol - Single Temp
q -MVC1-BAT Time-Trol - Single Temp Battery Operated
(Batteries Not Included)
o -MVC2 Time-Trol - Hot & Cold
o -MVC2-BAT Time-Trol - Hot & Cold Battery Operated
(Batteries Not Included)
FLUSH VALVE GPF’s (Must Specify)
o -HET-1.28 GPF
o -ULF-1.6 GPF
o -3.5 GPF
FLUSH VALVE OPTIONS (Must Specify)
o -EVSFV Electronic Flush Valve
o -EVSPFV Electronic Flush Valve w/ Piezo Pushbutton
o -FV Flush Valve, Mechanical
o -FVBO Flush Valve by Others
o -FVH Flush Valve, Hydraulic
o -MVCFV Time-Trol Electronic Flush Valve
11 3 8 "
[289]
18"
[457]
8
7
6
5
4
15 7 8 "
[403]
27"
[686]
1440-AR-2-BPH-04 Shown. -AL Opposite.
Important: Installation instructions and current rough-in are furnished with each fixture. Do not rough in without certified dimensions.
Dimensions are subject to manufacturer's tolerance of plus or minus 1/4" and change without notice. Acorn assumes no responsibility for use of void or superseded data. © Copyright 2009 Acorn Engineering Company
Selection Summary
Model No. & Option___________________________
Quantity____________________________________
45°
NOTES:
1. LAVY BUBBLER.
2. LAVY VALVE PUSHBUTTONS.
3. FLUSH VALVE PUSHBUTTON.
4. WALL MOUNTING HARDWARE.
5. TOILET WASTE OUTLET.
6. LAVY WASTE OUTLET.
7. OPTIONAL -FV FLUSH VALVE.
8. -04 AIR-CONTROL VALVE.
Page 2
P.1440
PRODUCT OPTIONS (Must Specify)
o -CI Cycle Interrupt for Time-Trol Valves
o -CO1 Cleanout w/ O-Ring, Connecting to No-Hub 4"
(Plain End Only)
o -CO1-3 Cleanout w/ O-Ring, Connection to No-Hub 3”
(Plain End Only, N/A with -WO3)
o -COH Cleanout Hook Assembly
o -CW Combined Waste
o -EG Enviro-Glaze, Specify Color: __________
o Toilet Exterior Only
o Toilet Interior
o -FMT Fixture Mounted Trim
o -FT Flood-Trol (Manual Reset)
o -FTA Flood-Trol Auto-reset
o -FTE Flood-Trol Electronic
o -FVO Flush Valve Opposite In Lieu of Standard Location
o -FVT Flush Valve Thru Wall Connector
o -GW Gasketed Toilet Waste
o -HET High Efficiency Toilet Design
o -HPS High Polished Seat #7 Finish
o -LPFV Less Punching for Flush Valve
o -LW1 Lavy thru Wall Extension with P-Trap
o -LWE Lavy Waste Extension (3" Standard)
Specify Length Beyond Fixture: __________
o -MT Metal Template (Only 1 Required Per Project)
o -OF Lavatory Overflow
o -PBP Pushrod Activated Pushbutton
o -PC Pinned Cleanout Plug
o -PH Paper Holder o L o R
o -PT 1-1/2” Removable P-Trap Waste
o -SW Wall Sleeve
o -TF Transformer, 120VAC to 24VAC
o -TG 12-Gage Cabinet
o -TSC Toilet Shipping Cover
o -TWE Toilet Waste Extension (3" Standard)
Specify Length Beyond Fixture: __________
o -VAC Acorn Vac System
o -WO3 3" Toilet P-Trap (3.5 GPF Only)
o -WO3B 3" Waste Outlet from 2-3/8” Waste (1.6 or 3.5 GPF)
Please visit www.acorneng.com
for most current specifications.
Approved for Manufacturing
Company__________________Title______________
Signature_________________ Date______________
Revised: 01/23/13
1 2 3
1440-CT-2-BPH-04
Acorn Engineering Company • 15125 Proctor Avenue • P.O. Box 3527 • City of Industry, CA 91744-0527 U.S.A.
Tel: (800) 488-8999 • (626) 336-4561 • Fax: (626) 961-2200 • www.acorneng.com • E-mail: info@acorneng.com
36 1 2 "
[926]
15"
[382]
4"
[102]
33 3 4 "
[857]