Model - Acorn Engineering

S T A N D A R D SS U G G E S T E D
Model A131400B is a wall mounted, vandal
resistant drinking fountain made from 18 gage,
304 stainless steel with a brushed finish. Unit
shall be activated by a self-closing, frontal push
pad, by using less than 5 pounds of force,
which activates an internally mounted valve
with an adjustable stream regulator controlling
the water flow. Bubbler shall be polished
chrome plated brass with a non-squirt feature
and operate on a water pressure range of
20-105 psig. Unit shall have a uniquely
designed, two-piece contoured bowl with
P-trap integral to the unit. Unit shall adhere to
ANSI A117.1 and ANSI/NSF 61, Section 9 and
CHSC 116875 requirements. Fixture meets
ADA, ADA Standing Person or ADA child
requirements when mounted appropriately.
n Child or Adult ADA Compliant (when
properly installed)
n 18 gage, 304 stainless steel
n Polished chrome plated brass, anti-rotation,
non-squirt bubbler
n 100 mesh inlet strainer
n Vandal resistant screws
n Integral P-trap
n Mounting plate with hardware
Member of
U.S. Green
Building
Council
Acorn Engineering Company assumes no
responsibility for use of void or superseded data.
© Copyright Acorn Engineering, City of Industry,
CA Member of Morris Group International.
Please visit www.acorndrinkingfountains.com
for most current specifications.
Submittal # A131
Date: 01/07/13
COMPLIES WITH
Recyclable
Product
Water
Conserving
Product
(additional costs)
A131 Series
Barrier Free, Wall Mounted
Drinking Fountain
Member of
o Stainless Steel Model:
A131400B
** U.S. DESIGN PATENT D545,607 (Bowl Design)
A 1 3 1 4 0 0 B
Material/Finish
2 Bronze
3 Gold (High Polish)
4 Stainless Steel (Std)
Options (may add additional costs)
o -AD1 Access door
o -AP1 Access panel for a single fountain
o -BP1 Back panel for
single contoured fountain
o -CSC Concealed support carrier
o -FRA1 Freeze resistant valve
Bubblers
F Flexible
B Chrome Plated Brass (Std)
S Lead-Free Stainless Steel
Custom color finishes
available upon request
o -HP High polished stainless steel
o -MF1 Mounting frame for a single fountain
ACORN
ENGINEERING
15125 Proctor Ave.
City of Industry, CA
91746 U.S.A.
Phone 800-591-9360
626-336-4561
Fax 626-855-4894

SELECTION SUMMARY
& APPROVAL FOR
MANUFACTURING
T E C H N I C A L
All dimensions are nominal and subject to manufacturer's change without notice. Acorn Engineering Company assumes no responsibility for use of void or
superseded data . © Acorn Engineering, City of Industry, CA, Member of Morris Group International. Please visit www.acorndrinkingfountains.com for most current
specifications.
2 3 8 "
[60]
14"
[356]
C
L
2 3 4 "
[70]
9 3 8 "
[238]
18"
[457]
4 5 8 "
[117]
1-1/4" [32]
P-TRAP PROVIDED
FINISHED FLOOR
*33"
[838]
6"
[152]
Company_______________________________________________________________________________________________________
Model Number & Options_____________________________________________________________________Quantity_______________
Contact_________________________________________________Title____________________________________________________
Signature
(Approval for
Manufacturing)__________________________________________________________________Date ____________________________
o Stainless Steel Model:
A131400B
GENERAL NOTES:
1. ALL DIMENSIONS ARE IN INCHES [MM]
*2. DIMENSIONS SHOWN ARE FOR RECOMMENDED ADULT HEIGHT. ADJUST VERTICAL
DIMENSIONS AS NECESSARY TO COMPLY WITH FEDERAL, STATE, & LOCAL CODES.
3. STOP VALVE NOT PROVIDED.
A131 Date: 01/07/13
Five Year Limited Warranty- (Continental United States and Canada Only) Parts are warranted for one (1) year from date of installation or 18
months from date of shipment from factory, whichever comes first.
LIMITED EXPORT WARRANTY: One (1) year on parts only.
1 3 8 "
[35]
800-591-9360
626-336-4561