Network Transformers - Augier
Network Transformers - Augier
Network Transformers - Augier
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SYSTEM<br />
INTERLOCKING<br />
Thanks to an interlocking system, access to TED transformers and connection interface depend on the earthing and<br />
short circuiting of cabling supplied at origin. This is carried out by an interlocking key together with a Ronis or<br />
Profalux key.<br />
MANHOLE LOCK<br />
The interlocking key can activate a safety<br />
lock N° 7 to release the grid located<br />
inside the inspection manhole between<br />
access covering and transformer.<br />
Only specific parts corresponding to<br />
figures 5, 7 and 8 are listed in <strong>Augier</strong> rates.<br />
LOCKING THE TED TRANSFORMER TERMINALS<br />
If the manhole locking system cannot be used, a terminal locking system can be installed directly on the TED<br />
transformer. The operating principle is the same as that of manhole lock: with a locknut.<br />
Example of locking terminals<br />
Bipolar box<br />
1A / 1D<br />
TED MMX<br />
10 kVA<br />
1 - Fixation device<br />
2 - Washer<br />
3 - Stainless steel nut<br />
4 - Wire mesh<br />
5 - Nylon cap<br />
6 - HM 10 Screw<br />
7 - Special Nut<br />
8 - Cap<br />
TED TTT<br />
16 kVA<br />
26