Network Transformers - Augier

ACCESSORIES FOR SINGLE-PHASE NETWORKS
DEAD END BOX, JUNCTION AND
DEVIATION BOXES
These different boxes made up of pluggable universal
two-pole consentric terminals receive either a concentric
two-pole 3.6 / 6 kV cable, or a radical field single pole
3.6 / 6 kV cable made up of a twisted cable strut. A single
pole cable’s cross section can be either 6, 10, 16, 25 or 35
mm². External diameter of the watertight outer covering
can’t exceed 24 mm.
They are delivered with the necessary equipment needed
to make the MV cable heads, as well as thewaterproof
plug covers.
1AX Box
(dead end box)
1AX / 1DX Box
(junction box)
JUNCTION AND DEVIATION BOXES WITH
EARTHING OF THE PERIPHERAL CABLE
On all these boxes it is possible to add an earthing
terminal connected to the interior of the plug-in
peripheral terminals. This addition does not change
its dimensions.
1AX / 2DX Box
(T-deviation box)
1AX / 3DX Box
(Cross-type deviation box)
Length Width Height Weight
1AX 70 70 375 1.5 kg
1AX / 1DX 150 70 375 3.3 kg
1AX / 2DX 150 150 375 5.6 kg
1AX / 3DX 150 150 375 7.4 kg
10