Centrifugal Fans AT belt driven - Nicotra Gebhardt
Centrifugal Fans AT belt driven - Nicotra Gebhardt Centrifugal Fans AT belt driven - Nicotra Gebhardt
AT G2L 7/7-18/18 Specifications Fan data Fittings / Accessories 104 High performance centrifugal twin fan AT G2L (size from 7/7 to 18/18) Lap-jointed scroll of galvanized steel EN 10142 assembled with roller-lock seaming. This twin version is made with two S version single fans, connected through three U-section spars and is fitted with two double-inlet impellers mounted on a common shaft, supported by three bearings. Fan type Volume flow Total pressure increase Static pressure Air density at fan inlet Air medium temperature Shaft power Efficiency Speed Sound power level (A weighted) Weight • Mounting feet • Motor brackets (Pick-A-Back) • Discharge flange • Discharge flex with flexible sleeve • Inlet guards • Discharge guard • Shaft guard for free shaft end • Matching flange Belt Driven Centrifugal Fans / AT / Specifications . . . . . . . . . . . . . . . . . . . . . . q V . . . . . . . . . . . . . . . . . . . . . . . . m³/h p F . . . . . . . . . . . . . . . . . . . . . . . . Pa p sF . . . . . . . . . . . . . . . . . . . . . . . . Pa r 1 . . . . . . . . . . . . . . . . . . . . . . . . kg/m³ t . . . . . . . . . . . . . . . . . . . . . . . . °C P a . . . . . . . . . . . . . . . . . . . . . . . . kW (h a ) . . . . . . . . . . . . . . . . . . . . . . . . N . . . . . . . . . . . . . . . . . . . . . . . . 1/min L WA . . . . . . . . . . . . . . . . . . . . . . . . dB m . . . . . . . . . . . . . . . . . . . . . . . . kg Options may be available only for orders of a minimum quantity, to be previously agreed • Inspection door • Drain plug • Single or double thickness powder coating • Shaft made of stainless steel • Nuts and bolts and fastening elements made of stainless steel • Aluminium inlet cone • Copper inlet cone
AT SC2 7/7-18/18 Specifications Fan data Fittings / Accessories High performance centrifugal twin fan AT-SC2 (size from 7/7 to 18/18) Lap-jointed scroll of galvanized steel EN 10142 assembled with roller-lock seaming. Twin version, made of two SC version fans, joined by three L-section spars, welded in the corners of the side frames. Two double-inlet impellers are mounted on a single shaft, supported by three bearings on rubber shock absorbers and inlet-mounted supporting spiders. The SC2 fans have the same characteristics of the G2L versions but with the additional stiffness provided by the welded frame. Fan type Volume flow Total pressure increase Static pressure Air density at fan inlet Air medium temperature Shaft power Efficiency Speed Sound power level (A weighted) Weight • Mounting feet • Motor brackets (Pick-A-Back) • Discharge flange • Discharge flex with flexible sleeve • Inlet guards • Discharge guard • Shaft guard for free shaft end • Matching flange Belt Driven Centrifugal Fans / AT / Specifications . . . . . . . . . . . . . . . . . . . . . . q V . . . . . . . . . . . . . . . . . . . . . . . . m³/h p F . . . . . . . . . . . . . . . . . . . . . . . . Pa p sF . . . . . . . . . . . . . . . . . . . . . . . . Pa r 1 . . . . . . . . . . . . . . . . . . . . . . . . kg/m³ t . . . . . . . . . . . . . . . . . . . . . . . . °C P a . . . . . . . . . . . . . . . . . . . . . . . . kW (h a ) . . . . . . . . . . . . . . . . . . . . . . . . N . . . . . . . . . . . . . . . . . . . . . . . . 1/min L WA . . . . . . . . . . . . . . . . . . . . . . . . dB m . . . . . . . . . . . . . . . . . . . . . . . . kg Options may be available only for orders of a minimum quantity, to be previously agreed • Inspection door • Drain plug • Single or double thickness powder coating • Shaft made of stainless steel • Nuts and bolts and fastening elements made of stainless steel • Aluminium inlet cone • Copper inlet cone 105
- Page 9 and 10: AT 7/7 Dimensions in mm, subject to
- Page 11 and 12: AT 9/7 Dimensions in mm, subject to
- Page 13 and 14: AT 9/9 Dimensions in mm, subject to
- Page 15 and 16: AT 10/8 Dimensions in mm, subject t
- Page 17 and 18: AT 10/10 Dimensions in mm, subject
- Page 19 and 20: AT 12/9 Dimensions in mm, subject t
- Page 21 and 22: AT 12/12 Dimensions in mm, subject
- Page 23 and 24: AT 15/11 Dimensions in mm, subject
- Page 25 and 26: AT 15/15 Dimensions in mm, subject
- Page 27 and 28: AT 18/13 Dimensions in mm, subject
- Page 29 and 30: AT 18/18 Dimensions in mm, subject
- Page 31 and 32: AT 20/15 Dimensions in mm, subject
- Page 33 and 34: AT 20/20 Dimensions in mm, subject
- Page 35 and 36: AT 22/15 Dimensions in mm, subject
- Page 37 and 38: AT 22/22 Dimensions in mm, subject
- Page 39 and 40: AT 25/20 Dimensions in mm, subject
- Page 41 and 42: AT 25/25 Dimensions in mm, subject
- Page 43 and 44: AT 28/20 Dimensions in mm, subject
- Page 45 and 46: AT 28/28 Dimensions in mm, subject
- Page 47 and 48: AT 30/20 Dimensions in mm, subject
- Page 49 and 50: AT 30/28 Dimensions in mm, subject
- Page 51 and 52: AT SC2 Dimensions in mm, subject to
- Page 53 and 54: AT G2C Dimensions in mm, subject to
- Page 55 and 56: Notes Notes Belt Driven Centrifugal
- Page 57 and 58: AT SC 7/7-18/18 AT C 7/7-18/18 Spec
- Page 59: AT TIC 20/15-30/28 Specifications F
- Page 63 and 64: AT SC2 7/7-18/18 Specifications Fan
- Page 65 and 66: Gebhardt fan systems - the "complet
- Page 67 and 68: Fittings / Accessories Corrosion Pr
- Page 69 and 70: Fittings / Accessories Volumeter p
- Page 71 and 72: Fittings / Accessories Anti Vibrati
- Page 73 and 74: Fan Sets Base Frame with Belt Tensi
- Page 75 and 76: RZR 11-0200/-0500 Fan set arrangeme
- Page 77 and 78: RZR 12-0200/-0710 Fan set arrangeme
- Page 79 and 80: RZR 13-0400/-1000 RZR 18-0400/-1000
- Page 81 and 82: AT 7/7-18/18 Fan set arrangement wi
- Page 83 and 84: RZR 12-0200/-0710 Fan set arrangeme
- Page 85 and 86: RZR 13-0400/-1000 RZR 18-0400/-1000
- Page 87 and 88: Fan Sets Min. Pulley-Diameter, Bear
- Page 89 and 90: Fan Sets Belt Driven Centrifugal Fa
- Page 91 and 92: Fan Sets Min. recommended Pulley Di
- Page 93 and 94: Description Bearings ADH / AT / RDH
- Page 95 and 96: Description Motors Attachment point
- Page 97 and 98: Description Operating limits ADH Pe
- Page 99 and 100: Description Operating limits RDH Pe
- Page 101 and 102: Description Performance p sF = p F
- Page 103 and 104: Description Sound 1 = Air permeable
- Page 105 and 106: Description Operating limits RZR AT
- Page 107 and 108: Notes Quality management system Mac
<strong>AT</strong> G2L 7/7-18/18<br />
Specifications<br />
Fan data<br />
Fittings / Accessories<br />
104<br />
High performance centrifugal twin fan <strong>AT</strong> G2L<br />
(size from 7/7 to 18/18)<br />
Lap-jointed scroll of galvanized steel EN 10142 assembled with roller-lock seaming.<br />
This twin version is made with two S version single fans, connected through three<br />
U-section spars and is fitted with two double-inlet impellers mounted on a common<br />
shaft, supported by three bearings.<br />
Fan type<br />
Volume flow<br />
Total pressure increase<br />
Static pressure<br />
Air density at fan inlet<br />
Air medium temperature<br />
Shaft power<br />
Efficiency<br />
Speed<br />
Sound power level (A weighted)<br />
Weight<br />
• Mounting feet<br />
• Motor brackets (Pick-A-Back)<br />
• Discharge flange<br />
• Discharge flex with flexible sleeve<br />
• Inlet guards<br />
• Discharge guard<br />
• Shaft guard for free shaft end<br />
• Matching flange<br />
Belt Driven <strong>Centrifugal</strong> <strong>Fans</strong> / <strong>AT</strong> / Specifications<br />
. . . . . . . . . . . . . . . . . . . . . .<br />
q V . . . . . . . . . . . . . . . . . . . . . . . . m³/h<br />
p F . . . . . . . . . . . . . . . . . . . . . . . . Pa<br />
p sF . . . . . . . . . . . . . . . . . . . . . . . . Pa<br />
r 1 . . . . . . . . . . . . . . . . . . . . . . . . kg/m³<br />
t . . . . . . . . . . . . . . . . . . . . . . . . °C<br />
P a . . . . . . . . . . . . . . . . . . . . . . . . kW<br />
(h a ) . . . . . . . . . . . . . . . . . . . . . . . .<br />
N . . . . . . . . . . . . . . . . . . . . . . . . 1/min<br />
L WA . . . . . . . . . . . . . . . . . . . . . . . . dB<br />
m . . . . . . . . . . . . . . . . . . . . . . . . kg<br />
Options may be available only for orders of a minimum quantity, to be previously<br />
agreed<br />
• Inspection door<br />
• Drain plug<br />
• Single or double thickness powder coating<br />
• Shaft made of stainless steel<br />
• Nuts and bolts and fastening elements made of stainless steel<br />
• Aluminium inlet cone<br />
• Copper inlet cone