Centrifugal Fans AT belt driven - Nicotra Gebhardt
Centrifugal Fans AT belt driven - Nicotra Gebhardt Centrifugal Fans AT belt driven - Nicotra Gebhardt
AT S 7/7-18/18 Specifications Fan data Fittings / Accessories 100 Belt Driven Centrifugal Fans / AT / Specifications High performance centrifugal fan AT S Double width double inlet (DWDI) belt driven fan, with forward curved blades. Lap-jointed scroll of galvanized steel EN 10142 assembled with roller-lock seaming. Straight cut off plate at fan outlet. Impeller with forward curved blades of galvanized steel EN 10142, statically and dynamically balanced to grade G4, according to UNI ISO 1940. Light construction, without side frames. Single row, deep groove, self-aligning ball bearings, lubricated and sealed for life, with eccentric collar locking. Bearings are mounted inside conductive rubber vibration absorbers on bearing supporting spiders. The mounting feet, which allow the fan to be installed in the 4 positions 0, 90, 180 and 270, as well as the outlet flange, are available on request. For sizes from 7/7 to 10/10, in addition to the standard construction version with flats on shaft ends (“type 1”), it is also available a version with keyways (“type 2”). Shaft ends of larger sizes are only of “Type 2”. Fan type Volume flow Total pressure increase Static pressure Air density at fan inlet Air medium temperature Shaft power Efficiency Speed Sound power level (A weighted) Weight • Mounting feet • Motor brackets (Pick-A-Back) • Discharge flange • Discharge flex with flexible sleeve • Inlet guards • Discharge guard • Shaft guard for free shaft end • Matching flange . . . . . . . . . . . . . . . . . . . . . . q V . . . . . . . . . . . . . . . . . . . . . . . . m³/h p F . . . . . . . . . . . . . . . . . . . . . . . . Pa p sF . . . . . . . . . . . . . . . . . . . . . . . . Pa r 1 . . . . . . . . . . . . . . . . . . . . . . . . kg/m³ t . . . . . . . . . . . . . . . . . . . . . . . . °C P a . . . . . . . . . . . . . . . . . . . . . . . . kW (h a ) . . . . . . . . . . . . . . . . . . . . . . . . N . . . . . . . . . . . . . . . . . . . . . . . . 1/min L WA . . . . . . . . . . . . . . . . . . . . . . . . dB m . . . . . . . . . . . . . . . . . . . . . . . . kg Options may be available only for orders of a minimum quantity, to be previously agreed • Inspection door • Drain plug • Single or double thickness powder coating • Shaft made of stainless steel • Nuts and bolts and fastening elements made of stainless steel • Aluminium inlet cone • Copper inlet cone
AT SC 7/7-18/18 AT C 7/7-18/18 Specifications Fan data Fittings / Accessories Belt Driven Centrifugal Fans / AT / Specifications High performance centrifugal fan AT SC and AT C Double width double inlet (DWDI) belt driven fan, with forward curved blades. Lap-jointed scroll of galvanized steel EN 10142 assembled through roller-lock seaming. Straight cut off plate at fan outlet. Impeller with forward curved blades of galvanized steel EN 10142, statically and dynamically balanced to grade G4, according to UNI ISO 1940. Construction with two side frames, made of cold-formed galvanized steel angular sections welded to the side plates, for a better strength and stiffness of the fan structure. Single row, deep groove, self-aligning ball bearings, lubricated and sealed for life, with eccentric collar locking. Bearings are mounted inside conductive rubber vibration absorbers on bearing supporting spiders. It can be easily installed in four different positions. Discharge flange on request. Where an even better mechanical strength is required, e.g. when the fan itself is used as a stiffening element of the base frame, a further reinforced version is available. It is identified by the letter C. This version is available in the same sizes as the SC version, with the same dimensions and the same performance limits. With the addition of three steel bars, welded between three corners of the side frames, the frames of these fans are joined to form a closed, box-like supporting structure. For sizes from 7/7 to 10/10, in addition to the standard construction version with flats on shaft ends (“type 1”), it is also available a version with keyways (“type 2”). Shaft ends of larger sizes are only of “Type 2”. Fan type Volume flow Total pressure increase Static pressure Air density at fan inlet Air medium temperature Shaft power Efficiency Speed Sound power level (A weighted) Weight • Mounting feet • Motor brackets (Pick-A-Back) • Discharge flange • Discharge flex with flexible sleeve • Inlet guards • Discharge guard • Shaft guard for free shaft end • Matching flange . . . . . . . . . . . . . . . . . . . . . . q V . . . . . . . . . . . . . . . . . . . . . . . . m³/h p F . . . . . . . . . . . . . . . . . . . . . . . . Pa p sF . . . . . . . . . . . . . . . . . . . . . . . . Pa r 1 . . . . . . . . . . . . . . . . . . . . . . . . kg/m³ t . . . . . . . . . . . . . . . . . . . . . . . . °C P a . . . . . . . . . . . . . . . . . . . . . . . . kW (h a ) . . . . . . . . . . . . . . . . . . . . . . . . N . . . . . . . . . . . . . . . . . . . . . . . . 1/min L WA . . . . . . . . . . . . . . . . . . . . . . . . dB m . . . . . . . . . . . . . . . . . . . . . . . . kg Options may be available only for orders of a minimum quantity, to be previously agreed • Inspection door • Drain plug • Single or double thickness powder coating • Shaft made of stainless steel • Nuts and bolts and fastening elements made of stainless steel • Aluminium inlet cone • Copper inlet cone 101
- Page 5 and 6: High performance centrifugal fan AD
- Page 7 and 8: Product overview range AT This kind
- Page 9 and 10: AT 7/7 Dimensions in mm, subject to
- Page 11 and 12: AT 9/7 Dimensions in mm, subject to
- Page 13 and 14: AT 9/9 Dimensions in mm, subject to
- Page 15 and 16: AT 10/8 Dimensions in mm, subject t
- Page 17 and 18: AT 10/10 Dimensions in mm, subject
- Page 19 and 20: AT 12/9 Dimensions in mm, subject t
- Page 21 and 22: AT 12/12 Dimensions in mm, subject
- Page 23 and 24: AT 15/11 Dimensions in mm, subject
- Page 25 and 26: AT 15/15 Dimensions in mm, subject
- Page 27 and 28: AT 18/13 Dimensions in mm, subject
- Page 29 and 30: AT 18/18 Dimensions in mm, subject
- Page 31 and 32: AT 20/15 Dimensions in mm, subject
- Page 33 and 34: AT 20/20 Dimensions in mm, subject
- Page 35 and 36: AT 22/15 Dimensions in mm, subject
- Page 37 and 38: AT 22/22 Dimensions in mm, subject
- Page 39 and 40: AT 25/20 Dimensions in mm, subject
- Page 41 and 42: AT 25/25 Dimensions in mm, subject
- Page 43 and 44: AT 28/20 Dimensions in mm, subject
- Page 45 and 46: AT 28/28 Dimensions in mm, subject
- Page 47 and 48: AT 30/20 Dimensions in mm, subject
- Page 49 and 50: AT 30/28 Dimensions in mm, subject
- Page 51 and 52: AT SC2 Dimensions in mm, subject to
- Page 53 and 54: AT G2C Dimensions in mm, subject to
- Page 55: Notes Notes Belt Driven Centrifugal
- Page 59 and 60: AT TIC 20/15-30/28 Specifications F
- Page 61 and 62: AT SC2 7/7-18/18 Specifications Fan
- Page 63 and 64: AT SC2 7/7-18/18 Specifications Fan
- Page 65 and 66: Gebhardt fan systems - the "complet
- Page 67 and 68: Fittings / Accessories Corrosion Pr
- Page 69 and 70: Fittings / Accessories Volumeter p
- Page 71 and 72: Fittings / Accessories Anti Vibrati
- Page 73 and 74: Fan Sets Base Frame with Belt Tensi
- Page 75 and 76: RZR 11-0200/-0500 Fan set arrangeme
- Page 77 and 78: RZR 12-0200/-0710 Fan set arrangeme
- Page 79 and 80: RZR 13-0400/-1000 RZR 18-0400/-1000
- Page 81 and 82: AT 7/7-18/18 Fan set arrangement wi
- Page 83 and 84: RZR 12-0200/-0710 Fan set arrangeme
- Page 85 and 86: RZR 13-0400/-1000 RZR 18-0400/-1000
- Page 87 and 88: Fan Sets Min. Pulley-Diameter, Bear
- Page 89 and 90: Fan Sets Belt Driven Centrifugal Fa
- Page 91 and 92: Fan Sets Min. recommended Pulley Di
- Page 93 and 94: Description Bearings ADH / AT / RDH
- Page 95 and 96: Description Motors Attachment point
- Page 97 and 98: Description Operating limits ADH Pe
- Page 99 and 100: Description Operating limits RDH Pe
- Page 101 and 102: Description Performance p sF = p F
- Page 103 and 104: Description Sound 1 = Air permeable
- Page 105 and 106: Description Operating limits RZR AT
<strong>AT</strong> S 7/7-18/18<br />
Specifications<br />
Fan data<br />
Fittings / Accessories<br />
100<br />
Belt Driven <strong>Centrifugal</strong> <strong>Fans</strong> / <strong>AT</strong> / Specifications<br />
High performance centrifugal fan <strong>AT</strong> S<br />
Double width double inlet (DWDI) <strong>belt</strong> <strong>driven</strong> fan, with forward curved blades.<br />
Lap-jointed scroll of galvanized steel EN 10142 assembled with roller-lock seaming.<br />
Straight cut off plate at fan outlet.<br />
Impeller with forward curved blades of galvanized steel EN 10142, statically and<br />
dynamically balanced to grade G4, according to UNI ISO 1940.<br />
Light construction, without side frames.<br />
Single row, deep groove, self-aligning ball bearings, lubricated and sealed for life, with<br />
eccentric collar locking. Bearings are mounted inside conductive rubber vibration<br />
absorbers on bearing supporting spiders.<br />
The mounting feet, which allow the fan to be installed in the 4 positions 0, 90, 180<br />
and 270, as well as the outlet flange, are available on request.<br />
For sizes from 7/7 to 10/10, in addition to the standard construction version with flats<br />
on shaft ends (“type 1”), it is also available a version with keyways (“type 2”).<br />
Shaft ends of larger sizes are only of “Type 2”.<br />
Fan type<br />
Volume flow<br />
Total pressure increase<br />
Static pressure<br />
Air density at fan inlet<br />
Air medium temperature<br />
Shaft power<br />
Efficiency<br />
Speed<br />
Sound power level (A weighted)<br />
Weight<br />
• Mounting feet<br />
• Motor brackets (Pick-A-Back)<br />
• Discharge flange<br />
• Discharge flex with flexible sleeve<br />
• Inlet guards<br />
• Discharge guard<br />
• Shaft guard for free shaft end<br />
• Matching flange<br />
. . . . . . . . . . . . . . . . . . . . . .<br />
q V . . . . . . . . . . . . . . . . . . . . . . . . m³/h<br />
p F . . . . . . . . . . . . . . . . . . . . . . . . Pa<br />
p sF . . . . . . . . . . . . . . . . . . . . . . . . Pa<br />
r 1 . . . . . . . . . . . . . . . . . . . . . . . . kg/m³<br />
t . . . . . . . . . . . . . . . . . . . . . . . . °C<br />
P a . . . . . . . . . . . . . . . . . . . . . . . . kW<br />
(h a ) . . . . . . . . . . . . . . . . . . . . . . . .<br />
N . . . . . . . . . . . . . . . . . . . . . . . . 1/min<br />
L WA . . . . . . . . . . . . . . . . . . . . . . . . dB<br />
m . . . . . . . . . . . . . . . . . . . . . . . . kg<br />
Options may be available only for orders of a minimum quantity, to be previously<br />
agreed<br />
• Inspection door<br />
• Drain plug<br />
• Single or double thickness powder coating<br />
• Shaft made of stainless steel<br />
• Nuts and bolts and fastening elements made of stainless steel<br />
• Aluminium inlet cone<br />
• Copper inlet cone