APPLIX Smart - Enteral Feeding Pump - Instructions for use
APPLIX Smart - Enteral Feeding Pump - Instructions for use
APPLIX Smart - Enteral Feeding Pump - Instructions for use
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Starting up the pump<br />
Insert giving set<br />
(See page 11)<br />
Automatic priming using the pump<br />
Keep key<br />
depressed<br />
Start<br />
Press key<br />
Stop<br />
Prime to the end of the giving set<br />
(Release key once priming is complete).<br />
Flashing bars and drops indicate the start of feed/fluid<br />
administration (*).<br />
Press key STOP appears in the display.<br />
Switch off<br />
Keep depressed<br />
<strong>for</strong> approx.<br />
1 second<br />
In mains mode, the "Plug" symbol is visible in the display.<br />
The pump retains all in<strong>for</strong>mation when switched off.<br />
This in<strong>for</strong>mation is saved <strong>for</strong> 1 month provided the battery was fully<br />
charged at switch off.<br />
18 4137-2_nu_Applix_<strong>Smart</strong>_GB<br />
GB<br />
(*) In order to detect an upstream occlusion occurred be<strong>for</strong>e starting the<br />
pump, the <strong>APPLIX</strong> <strong>Smart</strong> delivers a small initial volume at a higher rate,<br />
right after START, if the door has been previously opened or an upstream<br />
occlusion alarm has been triggered (see Operating conditions p. 31).
Change language