CADD Engineering Standards - Ohio Department of Transportation

Sheet Design Files (verify all reference files are included):
Site Plan (DE)
Plan (GP), Profile (GF), or Plan & Profile Sheets (GP)
Cross Section Sheets (XS)
Intersection/Interchange Details (GI)
Appendix E – Electronic Submission Checklist
GEOPAK Files Submitted
Coordinate Geometry Database (.gpk)
Existing Ground Triangle Model (.tin)
ASCII Files Submitted
Horizontal Alignments (see 504.2)
Vertical Alignments (see 504.3)
Monuments (see 504.6)
LandXML Files Submitted
Horizontal Alignments (see 504.4)
Vertical Alignments (see 504.4)
Existing Ground Triangle Model (see 504.5)
3. Major and Paths 2, 3, 4, and 5 Projects:
Note – Major and Paths 2, 3, 4, and 5 projects follow the same file submittals as Minor Projects in
addition to the specific files listed below. (Unless waived by DPEA for Path 2 only)
ASCII Files Submitted
GEOPAK Cross Section Staking Reports (see 504.7)
LandXML Files Submitted
Proposed Triangle Model (see 504.5) (if specified in
scope)
GEOPAK Files Submitted
Proposed Triangle Model (.tin) (if specified in scope)
4. File check:
Do the DGN files match the mylars? Yes No
Do the chains and profiles match the plans? Yes No
5. Provide a Zip file as per Section 504.8 for all the applicable files referenced
above.
E-2 ODOT CADD Engineering Standards