CADD Engineering Standards - Ohio Department of Transportation

Appendix E – Electronic Submission Checklist January 18, 2013
The following checklist may be used by the District to determine if electronically submitted files
meet the requirements of The Location and Design Manual, Volume 3 – Highway Plans, Section
1500.
1. The project classification per the PDP (Old and New) is:
Project Submitted Remarks
Minimal Existing Plans and Designer Office Calcs Required
Minor
< 1.0 acre earth disturbed area – See item 2 below
(unless waived by DPEA)
Minor > 1.0 acre earth disturbed area – See item 2 below
Major See items 2 through 5 below
Path 1 Existing Plans and Designer Office Calcs Required
Path 2-5
See items 2 through 5 below (unless waived by DPEA
for Path 2 only)
2. Have the following files been submitted?
Files Required for All Projects Submitted
Existing Plans
Designer Office Calculations
MicroStation DGN Files
(See Figure 304-1 for File Name Type Codes shown in parenthesis below)
Required Basemap Design Files:
Existing Roadway (BA, BC, or BE)
Proposed Roadway (BP)
Right-of-Way (BR)
Profiles (BF)
GEOPAK Cross Section Cells (Roadway) (XC)
Optional Discipline Specific Basemap Design Files:
(required for electronic submission if referenced to the plan sheets)
Bridge (BS)
Drainage (BD)
Environmental (BV)
Landscaping (BL)
Lighting (BH)
Maintenance of Traffic (BM)
Signals (BG)
Geotechnical (BI)
Traffic Control (BT)
Utilities (BU)
Submitted
ODOT CADD Engineering Standards E-1