CADD Engineering Standards - Ohio Department of Transportation
CADD Engineering Standards - Ohio Department of Transportation CADD Engineering Standards - Ohio Department of Transportation
January 18, 2013 The following options related to Line Style placement are available from or when using the Design Settings dialog box: Custom Line Style Creation The default custom line style Scale Factor to be used when drawing MicroStation elements is specified here. For ODOT plans, this value should be set to one (1.0) as shown right, to allow the Model Annotation Scale to control the custom line style scale. The Annotation Scale is set as follows for Custom Line Styles: • Select the Models dialog box. • From the Models dialog box, select Edit Model Properties to access the Model Properties dialog box as shown below. • From the Line Style Scale drop-down menu, set the Line Style Scale as desired. In the example shown right, the Annotation Scale is set to a value of Engr 1:20. The Line Style Scale value is set to match the Annotation Scale. 24 ODOT CADD Engineering Standards
Survey Processing (Existing Basemap): January 18, 2013 The GEOPAK Project Preferences dialog box is used to control how the line styles in the basemap will be drawn. To use the Model Properties “Line Style Scale” feature, the field data must be visualized at a scale of one (1.0) as shown below: The Plot Scale feature is used to control the size of the custom line styles used in the mapping of the survey data. The base scale is defined for each feature code in the SMD file. The Plot Scale should normally be set to a value of one (1.0) for all ODOT projects. Note: For more detailed information on processing the survey data into MicroStation see the ODOT GEOPAK V8i Survey Training Guide and the ODOT GEOPAK V8i Road 1 Training Guide. ODOT CADD Engineering Standards 25
- Page 1: Ohio Department of Transportation C
- Page 5 and 6: Table of Contents January 18, 2013
- Page 7 and 8: January 18, 2013 307 GEOPAK Project
- Page 9 and 10: 100 GENERAL 101 Introduction Januar
- Page 11 and 12: 200 CADD STANDARDS 201 Installation
- Page 13 and 14: Alternate Configuration Files There
- Page 15 and 16: 202.3 ByLevel Considerations Januar
- Page 17 and 18: Bridge General Gen - SV Bridge Pres
- Page 19 and 20: 202.5 Priority and Transparency Jan
- Page 21 and 22: January 18, 2013 You do not need to
- Page 23 and 24: Transparency January 18, 2013 Trans
- Page 25 and 26: January 18, 2013 The Transparency v
- Page 27 and 28: 204.2 Types of Line Styles ODOT CAD
- Page 29 and 30: January 18, 2013 The following deta
- Page 31: GEOPAK Placement (Existing and Prop
- Page 35 and 36: January 18, 2013 When attaching Ref
- Page 37 and 38: Bridge Design Files: January 18, 20
- Page 39 and 40: 206.3 Cell Libraries January 18, 20
- Page 41 and 42: ODOT CADD Standards contain two (2)
- Page 43 and 44: January 18, 2013 The following proc
- Page 45 and 46: January 18, 2013 The following opti
- Page 47 and 48: Survey Processing (Existing Basemap
- Page 49 and 50: January 18, 2013 Changing the Annot
- Page 51 and 52: 207.2 Text Size January 18, 2013 St
- Page 53 and 54: January 18, 2013 Selecting a Text S
- Page 55 and 56: January 18, 2013 In order to apply
- Page 57 and 58: 208 Seed Files 208.1 General Januar
- Page 59 and 60: 211 Working Units 211.1 General Jan
- Page 61 and 62: 214 GEOPAK Criteria Files 214.1 Gen
- Page 63 and 64: 300 FILE MANAGEMENT 301 General 301
- Page 65 and 66: January 18, 2013 Figure 302-1 Minor
- Page 67 and 68: January 18, 2013 Figure 302-3 Proje
- Page 69 and 70: January 18, 2013 Figure 302-9 Struc
- Page 71 and 72: 303 References 303.1 General Januar
- Page 73 and 74: 303.2.1 Types of Models January 18,
- Page 75 and 76: 303.2.3 Model Properties January 18
- Page 77 and 78: 303.2.4 Referencing Models January
- Page 79 and 80: January 18, 2013 Final plan sheets
- Page 81 and 82: 304.3 File Name Format January 18,
January 18, 2013<br />
The following options related to Line Style placement are available from or when using the Design<br />
Settings dialog box:<br />
Custom Line Style Creation<br />
The default custom line style Scale Factor to be<br />
used when drawing MicroStation elements is<br />
specified here. For ODOT plans, this value should<br />
be set to one (1.0) as shown right, to allow the Model<br />
Annotation Scale to control the custom line style<br />
scale.<br />
The Annotation Scale is set as follows for Custom Line Styles:<br />
• Select the Models dialog box.<br />
• From the Models dialog box, select Edit Model Properties to access the Model<br />
Properties dialog box as shown below.<br />
• From the Line Style Scale drop-down menu, set the Line Style Scale as desired.<br />
In the example shown right, the<br />
Annotation Scale is set to a value<br />
<strong>of</strong> Engr 1:20. The Line Style<br />
Scale value is set to match the<br />
Annotation Scale.<br />
24 ODOT <strong>CADD</strong> <strong>Engineering</strong> <strong>Standards</strong>
Change language