CADD Engineering Standards - Ohio Department of Transportation

January 18, 2013
Select the symbology box to the right of the XS Elements label to identify the cross section elements that
make up the proposed finished grade.
If ODOT criteria files are used to generate the proposed cross section graphics, the following levels
should be selected within the Candidate Elements dialog:
XS_P_Ditch_Bottom
XS_P_Finished_Grade
XS_P_Finished_Grade_Seeded
XS_P_Pavt_Surface
XS_P_Shoulder_Surface
Note: Additional levels may need to be selected depending on how the cross sections graphics were
drawn. Use the Match button on the Candidate Elements dialog to select the desired cross section
elements.
Set the Output Format to X,Y,ELEV,OFFSET.
Check on the 5-Point option.
Key-in the name of the ASCII File for the cross section report.
Select the Add icon to the right of the Multi-Line Report dialog to add the report to the list. The report will
show up in the list box in the center of the dialog as shown in the example on the previous page.
ODOT CADD Engineering Standards 109