CADD Engineering Standards - Ohio Department of Transportation

January 18, 2013
Each horizontal alignment shall be stored in a separate LandXML report file. GEOPAK does not provide
the capability to export profiles independently from the chains, therefore the LandXML report for a given
horizontal alignment shall also contain the associated vertical alignment as shown in the following
example.
To generate a LandXML 1.2 report using GEOPAK, select File > Export LandXML 1.2 Geometry from
the GEOPAK Coordinate Geometry dialog as show below.
Use the PID number for the Project Name. The Description is optional. Select the desired Chain and
Profile to export as shown in the example below.
It is not permissible to export all Chains and Profiles in a single LandXML report file.
102 ODOT CADD Engineering Standards