WOOD CHIPPER

TP 160
Elegant and efficient wood chipper with hydraulic in feed for chipping
of branches of up to 160 mm in diameter. The integrated hydraulic
system and the 2 horizontal feed rollers ensure strong and problem-free
feeding.
TP 160 is a disc chipper where the wood is chipped at an angle of 90
degrees. The heart of the machine is the two knives and two anvils. The
chipping is done with great efficiency – and a nice, uniform chip quality.
The new design, increased capacity and improved service makes the TP
160 an attractive wood chipper and shows that even a small machine can
be used for professional use.
TP 160 MobilE is with lombardini motor.
TP 160 TRACK is with lombardini motor.
TP 100 TP 130 TP 160
(1) (2)
Standard on TP 160
• Integrated hydraulic system
• Two knives
• Two anvils in Raex 400
• Two hydraulically powered feed rollers
• Powerful tension spring on moving rollers
• Rotating ejector spout
• Wipers to ensure against accumulation of material in
feed rollers and rotor housing
• Hydraulic adjustment of the roller speed and thereby the chip size
• Rotor lock for securing the rotor disc when changing knives
• Operating bar start/stop/reversing of the feed rollers
• PTO shaft for TP 160 PTO
• Stress control system, TP PILOT – for TP 160 MOBILE
and TP 160 TRACK
PARK Model Knives Chip size Capacity* PTO Weight Fuel
Variants HxW mm Number mm m³/time kW(hp) RPM kg Type Use/h* Tank ltr.
Tractor TP 160 PTO
On trailer 80 km/h,
35 hp, Lombardini motor
On tracks
35 hp, Lombardini motor
* Experience numbers
5-12 22-59 (30-80) 540 555
TP 160 MOBILE
160 x 220 2 4-10
5-10 780
3
Diesel
TP 160 TRACK 5-10 1050 4
TP 200 TP 250 TP 230 TP 270 TP 280 TP 400
20
(3)
(1): TP 160 PTO · (2): TP 160 MOBILE • (3): TP 160 TRACK
PA R K
9