WOOD CHIPPER

1 4
(1)
(2) (3)
TP 270
Disc chipper with hydraulic feed and the feedhopper at a 45 degree
angle. A forceful and effective wood chipper for chipping wood of up to
270 mm in diameter. The vertical feed rollers and the cutting angle of 45
degrees gives a large capacity and aggressive feeding of even entire trees.
TP 270 is available with either manual operation or operation with crane.
Required power from 100 to 200 hp.
TP 270 with manual operation is also equipped with a rotating 3-point
suspension so the wood chipper can be turned (hydraulically) behind the
tractor into the transport position.
TP 270 is also available in a reversed edition (F) so it can be mounted
at the front.
TP 270 is an obvious choice if you want large capacity and if coupling to
a trailer is required.
TP WINCH
Efficient and easy solution when large and heavy material has to be
moved to the wood chipper.
FOREST Model Knives Chips Cutting
angle
TP 100 TP 130 TP 160
F O R E S T
(1) TP 270 PTO • (2) TP 270 PTO K • (3) TP 270 PTO
Standard on TP 270
• Integrated hydraulic system
• Three knives
• Three sliver breakers type A
• Two anvils in Raex 400
• Two hydraulically powered feed rollers which ensure
a powerful feeding
• Hydraulic cylinder for opening of moving rollers
• Rotating ejector spout
• Wipers to ensure against accumulation of material
in the rotor housing
• Changeable casing in rotor housing
• Hydraulic adjustment of the roller speed
• Rotor lock for securing the rotor disc when changing knives
• Trailer hitch
• Danfoss Hydraulic motors
• Stress control system – TP PILOT K – on TP 270 PTO K and
TP 270 PTO FRONT K
• Split rotor housing with hydraulic opening on TP 270 PTO K
Capacity PTO Integrated
drive
Varianter HxW mm Number mm m³/time kW(hp) RPM kg
Tractor
Tractor and crane
Tractor and crane for front
TP 270 PTO
TP 270 PTO K
TP 270 PTO KF
270 X 290 3 12-22 45
Weight
20-40
1385
80-150 (100-200) 540/1000 x
25-50 1345
TP 200 TP 250 TP 230 TP 270 TP 280 TP 400