WOOD CHIPPER

1 2
(1)
(2) (3)
TP 250
If you want large capacity, flexibility and a uniform chip quality from your
wood chipper then TP 250 is the answer. TP 250 is a disc chipper with
hydraulic feed. It is effective for cleaning up and chipping branches with
a width of up to 250 mm in diameter. The large rotor disc with three knives
combined with three anvils, a 90 degree cutting angle and two horizontal
feed rollers ensure a very effective chipping of everything from
thin branches to entire trees. Required power from 60 to 140 hp.
Standard on TP 250
• Integrated hydraulics system
• Three knives
• Three anvils in Raex 400
• Two hydraulically powered feed rollers which ensure
a powerful feeding
• Powerful tension spring on moving rollers
TP 100 TP 130 TP 160
(1) TP 250 PTO • (2) TP 250 PTO K • (3) TP 250 MOBILE TuRnTABLE
• Rotating ejector spout
• Wipers to ensure against accumulation of material
at feed rollers and rotor housing
• Hydraulic adjustment of the roller speed and thereby
the chip size
• Changeable casing in rotor housing
• Rotor lock for securing the rotor disc when changing knives
• Operating bar start/stop/reversing of the feed rollers
• Danfoss Hydraulic motors
• PTO shaft for TP 250 PTO and TP 250 PTO K
• TP PILOT on MOBIL TURNTABLE
• Stress control system – TP PILOT K – on TP 250 PTO K
• Split rotor housing on TP 250 PTO K
PARK Model Knives Chip Size Capacity PTO Weight Fuel
Variants HxB mm Number mm m³/hour kW(hp) RPM kg Type Use/h* Tank ltr.
Tractor TP 250 PTO
Tractor and crane TP 250 PTO K 260 x 350 3 4-13
10-25 1030
On trailer with
TURNTABLE 80 km/h
PA R K
TP 250
MOBILE TURNTABLE
10-25
45-104
(60-140)
540/1000 1065
10-20 2250 Diesel 5 60
TP 200 TP 250 TP 230 TP 270 TP 280 TP 400