Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>WOOD</strong> <strong>CHIPPER</strong><br />
For Garden, Park and Forest
Welcome to Linddana<br />
Linddana manufactures and sells wood chippers at home and abroad<br />
with great success - and has done it for more than 30 years. TP wood<br />
chippers are manufactured in Denmark and comply with the latest EU<br />
requirement for safety - EN 13525. Thus both operators and employers<br />
are fully protected.<br />
High quality, good functionality and a solid design as well as a close<br />
cooperation with professional and far-seeing Danish and international<br />
forest technicians have contributed to Linddana being one of the leading<br />
producers of wood chippers with considerable export to a number<br />
of countries worldwide.<br />
1980<br />
Svend Lind buys<br />
Thyregod Production<br />
2 L I N D D A N A A · S<br />
Focus on the environment<br />
Originally the goal was to develop wood chippers which could produce<br />
chips for heating as a replacement for fossil fuels. Later it turned out<br />
that the increased conscience concerning recycling of nature’s own<br />
products also made chips a popular product in the green sector for<br />
covering and compost as well as for layering on paths and walking<br />
areas.<br />
Linddana deals exclusively with the development, production and sale<br />
of wood chippers, and therefore has an extensive experience and<br />
know-how in the area. Visit us on www.tpchipper.com<br />
1983 1986 1990 1994 2001 2003<br />
First export order<br />
is received<br />
Moves to a new location The company is<br />
changed to a limited<br />
company and is renamed<br />
to Linddana A/S<br />
The business award<br />
is given<br />
Generational change<br />
in the owner circle<br />
Renovation and<br />
extension of<br />
the facilities<br />
Today<br />
4500 m² of production and<br />
stock and 800 m² for administration<br />
and exhibits
The TP series - Garden, Park and Forest<br />
Linddana manufactures three series of wood chippers. The series are<br />
divided into Garden, Park and Forest. The primary difference between<br />
the series is the size of the material that needs to be cut. The material<br />
can vary from small branches to whole trees with a trunk size of 40 cm.<br />
The wood chippers are either mounted to a trailer with its own engine<br />
or for mounting to a tractor.<br />
The Garden series<br />
It is perfect for use in small gardens where there is not much space. A<br />
very effective small wood chipper which is easy to manoeuvre around<br />
and which can handle the wood refuse that is typical when thinning out<br />
gardens and parks. The typical users are houseowners’ associations,<br />
rental companies, housing associations and cemeteries. The chips<br />
from the Garden series are very popular as use for ground cover.<br />
The Park series<br />
The build of the wood chippers in the park series makes them perfect<br />
for cutting green refuse from privet hedges to large branches and entire<br />
trees. One of the major advantages of the park series is a very uniform<br />
chip quality. This makes the series very suitable for production of chips<br />
for use in small chip furnaces and stokers where there are often large<br />
demands for the chip size - as well as for ground cover on beds or as<br />
composting.<br />
1981<br />
The first TP wood chipper<br />
in the forest series<br />
is delivered<br />
1984<br />
The first wood chipper<br />
with crane feed is<br />
introduced<br />
1989<br />
The first wood chipper<br />
in the park series is<br />
delivered<br />
1990<br />
The first wood chipper<br />
on a trailer with its own<br />
engine<br />
is introduced<br />
The forest series<br />
The forest series is constructed for wood chipping of trees with as large<br />
a capacity and as uniform a chip quality as possible. The chips from the<br />
forest series are used for combustion in large and medium sized heating<br />
systems, as laying on beds as well as on paths and walking areas.<br />
The wood chippers are available in several models depending on if they<br />
are needed for row felling or driving along wheel tracks where the wood<br />
is lying perpendicularly on the track.<br />
The wood series has machines with an integrated hitch for a trailer so<br />
the chips can be ’blown’ directly into the trailer. This has been crucial<br />
for optimal wood chipping where fast cleaning and laying of the chips<br />
on i.e. paths and as ground cover is necessary. The largest machines<br />
in the forest series can or should be operated with a crane as the diameters<br />
of the trees can be up to 40 cm.<br />
1993<br />
The first wood chipper<br />
in the garden series is<br />
delivered<br />
2001<br />
New generation of<br />
wood chippers is introduced<br />
2006<br />
TP 400 is introduced for<br />
the first time<br />
2008<br />
New design line with TP<br />
160 and the introduction<br />
of TRACK<br />
T P S e r I e N<br />
3
content<br />
TP Wood chipper for Garden<br />
The TP 100 series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7<br />
Fast and effective wood chipping. Compact design. Simple and easy to service.<br />
Required power: 15-40hp<br />
Trunk diameter – up to 10 cm.<br />
TP Wood chipper for Park<br />
The TP 130 series (Required power: 25-60hp) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
Fast knife change without adjustments. Hydraulic adjustment of the chip size.<br />
Simple use. Simple and easy to service.<br />
Trunk diameter – up to 13 cm.<br />
page 8<br />
The TP 160 series (Required power: 30-80hp) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
Fast knife change without adjustments. Hydraulic adjustment of the chip size.<br />
Simple use. Simple and easy to service.<br />
Trunk diameter – up to 16 cm.<br />
page 9<br />
The TP 200 series (Required power: 40-115hp) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
Fast knife change without adjustments. Hydraulic adjustment of the chip size.<br />
Simple use. Simple and easy to service.<br />
Trunk diameter – up to 20 cm.<br />
page 10<br />
The TP 250 series (Required power: 60-140hp) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
Fast knife change without adjustments. Hydraulic adjustment of the chip size.<br />
Simple use. Simple and easy to service. Can also be operated with crane.<br />
Trunk diameter – up to 25 cm.<br />
page 12<br />
TP Woodchipper for forest<br />
TP 230 series (Required power: 50-120hp) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 13<br />
Adjustable knives for variable chip sizes. Hydraulic adjustment of speed on the rollers.<br />
Simple use. Simple and easy to service.<br />
Trunk diameter – up to 23 cm.<br />
TP 270 series (Required power: 100-200hp) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14<br />
Adjustable knives for variable chip sizes. Hydraulic adjustment of speed on the rollers.<br />
Simple use. Simple and easy to service. Can also be operated with crane.<br />
Trunk diameter – up to 27 cm.<br />
TP 280 series (Required power: 135-200hp) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 15<br />
Adjustable knives for variable chip sizes. Hydraulic adjustment of speed on the rollers.<br />
Simple use. Simple and easy to service. Must be operated with a crane.<br />
Trunk diameter – up to 28 cm.<br />
TP 400 series (Required power: 200-400hp) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16<br />
Adjustable knives for optional chip sizes. Hydraulic adjustment of speed on the rollers.<br />
Simple use. Simple and easy to service. Must be operated with a crane.<br />
Trunk diameter – up to 40 cm.<br />
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 17<br />
The machines in the brochure may be shown with accessories<br />
L I N D DA N A A · S<br />
4
SerIeS<br />
5<br />
MoDeL TP 100 TP 130 TP 160 TP 200 TP 250 TP 230 TP 270 TP 280 TP 400<br />
GARDEN X<br />
PARK X X X X<br />
FOREST X X X X<br />
Features<br />
MoDeL TP 100 TP 130 TP 160 TP 200 TP 250 TP 230 TP 270 TP 280 TP 400<br />
For tractor X X X X X X X<br />
For tractor and crane X X X X<br />
On single axle trailer, 80 km/h X X X<br />
On twin axle trailer with turntable, 80 km/h X X<br />
Self-propelling unit on tracks X<br />
Placement of the hopper in relation to the direction of travel<br />
MoDeL TP 100 TP 130 TP 160 TP 200 TP 250 TP 230 TP 270 TP 280 TP 400<br />
Vertically X<br />
Parallel X X X X X X<br />
90º to the side X<br />
At a 45º angle backwards X<br />
Model designation<br />
The basic version of the TP wood chipper is for tractor<br />
Type Designation<br />
PTO With three-point connection and PTO shaft<br />
MOBILE On trailer with engine<br />
TRACK Self-propelling unit on tracks<br />
TURNTABLE Turntable<br />
FRONT For mounting on the front<br />
K For crane feeding<br />
L I N D D A N A A · S
6 L I N D D A N A A · S<br />
The Garden series<br />
The chips from the garden series can vary in size from 5 to 50 mm<br />
depending on the type of tree being cut. The end result is nice and<br />
varied chips for laying as ground cover on beds or for laying on<br />
paths and walking areas.<br />
The Park series<br />
The perpendicular cutting angle on the wood chippers in the<br />
park series results in very uniform and short fibered chips whose<br />
length can be varied by adjusting the speed on the feed rollers.<br />
The chip quality depends on the material being cut, but generally<br />
the chips can be used for even small chip furnaces and stokers<br />
without problems. If there is a need for high chip quality, the number<br />
of cutters can be reduced by fitting sliver breakers in the wood<br />
chipper. The chips from the Park series are also perfect for jobs<br />
where optimal and fast composting of green refuse is required.<br />
chip sizes: TP 130 = 8 mm<br />
TP 160 = 10 mm<br />
TP 200 = 10 mm<br />
TP 250 = 13 mm<br />
The forest series<br />
The angled cutting angle on the wood chippers in the Forest series<br />
results in larger chips. The knives can be adjusted for different<br />
chip sizes and sliver breakers ensure a uniform chip quality. Sliver<br />
breakers are standard on the TP 230 and TP 270.<br />
The benefit of adjusting the knives for different chip sizes is that<br />
you can produce the correct chips in the desired quality for different<br />
uses. The uses can be burning in different sizes of heating<br />
systems, as ground covering or for laying on paths and walking<br />
areas.<br />
chip sizes: TP 230 = 12-19 mm<br />
TP 270 = 12-22 mm<br />
TP 280 = 12-23 mm<br />
TP 400 = 20-40 mm
Wood chips today<br />
Chips are a natural material with a lot of good qualities.<br />
Wood chips for cover is a standard product which can be bought<br />
by private consumers in basically all garden centres. By using wood<br />
chips for cover you avoid the use of sprays since a layer of 10 - 15 cm<br />
makes it almost impossible for the weeds to grow through. This ability<br />
has made wood chips a very popular product both for cities and private<br />
consumers.<br />
Wood chips for heating is a professional industry. In forestry, wood<br />
chipping is the most common method for disposing of wood and<br />
branch refuse which has thus become a positive economical factor.<br />
Many private house owners have installed chip furnaces or stokers<br />
and wood chips are a common commodity both for heating and cover.<br />
Chips are used in large quantities for energy, industrial purposes like<br />
paper and chipboard production as well as bottom cover and covering<br />
for paths with a low traffic pressure.<br />
Chipping is a fast, simple and environmentally friendly way of disposing<br />
branch refuse.<br />
TP 100<br />
The TP 100 is a drum chipper with a vertical funnel. A small, compact<br />
and effective wood chipper for chipping branches up to 100 mm in diameter.<br />
Feeding and cutting the material is achieved by the combination<br />
of the vertical chipper and the knives’ position on the drum in relation<br />
to the anvil. Power requirement from 15 to 40 hp.<br />
TP 100 is available for tractor. A small wood chipper with large capacity<br />
and very handy in tight places.<br />
GARDEN Model Knives Chip size Capacity PTO Weight<br />
Variants HxW mm Number mm m³/time kW(hp) RPM kg<br />
Tractor TP 100 PTO 150 x 275 2 5-20 1-4 11-29 (15-40) 540 195<br />
TP 100 TP 130 TP 160<br />
Standard on TP 100<br />
• Rotating ejector spout<br />
• Gear<br />
• Two reversible knives<br />
• One anvil in Raex 400<br />
• High-tensile steel<br />
(1): TP 100 PTO<br />
NEW VERSION<br />
TP 200 TP 250 TP 230 TP 270 TP 280 TP 400<br />
G A R D E N<br />
7
8<br />
(1)<br />
(2) (3)<br />
PARK Model Knives Chip size Capacity PTO Weight Fuel<br />
Variants HxW mm Number mm m³/our kW(bhp) RPM kg Type Use/h* Tank ltr.<br />
For tractor TP 130 PTO<br />
130 x<br />
3-10 18-45 (25-60) 540 502<br />
2 8<br />
On trailer 80 km/h, 25 hp TP 130 MOBILE 220<br />
3-6 660 Petrol 5 24<br />
TP 100 TP 130 TP 160<br />
PA R K<br />
(1): TP 130 PTO · (2): TP 130 PTO • (3): TP 130 MOBILE<br />
TP 130NEW<br />
Characteristic of this new machine is that the price has been optimised<br />
without compromising quality and safety. TP 130 has a newly developed<br />
hydraulically powered retraction cylinder with shark-like teeth for<br />
extra aggressive retraction when the wood is led through the hopper<br />
and directly into the knives. The machine is simple in construction, but<br />
has the functions that are needed to chip at convincing capacity. The<br />
chips that are produced are 8 mm long.<br />
In terms of safety the machine complies with the current legislation<br />
in DK and the EU. The wood chipper is equipped with an operation bar<br />
for controlling the retraction cylinder. With the operation bar it is possible<br />
for the operator to start and stop as well as reverse the retraction<br />
cylinder.<br />
Revolution guard – TP PILOT – is recommended for tractor with less than 40 bhp<br />
Standard on TP 130<br />
• Integrated hydraulic system<br />
• Two knives<br />
• Two anvils in Raex 400<br />
• Quick knife change without adjustment<br />
• One hydraulically powered retraction cylinder<br />
• Turnable ejector tube<br />
• Deflectors to ensure against accumulation of material<br />
at retraction cylinder and in the rotor house<br />
• Rotor lock to secure rotor disc at knife change<br />
• Operation bar for start/stop/reverse of retraction cylinder<br />
• Adjustable foot in 2 positions<br />
• PTO axle<br />
• All wear parts can be replaced with standard tools<br />
• Thorough manual with spare parts catalogue<br />
• TP PILOT standard on TP 130 MOBILE<br />
• 25 bhp KOHLER motor on TP 130 MOBILE<br />
• V-belt coupling on TP 130 MOBILE<br />
TP 200 TP 250 TP 230 TP 270 TP 280 TP 400
TP 160<br />
Elegant and efficient wood chipper with hydraulic in feed for chipping<br />
of branches of up to 160 mm in diameter. The integrated hydraulic<br />
system and the 2 horizontal feed rollers ensure strong and problem-free<br />
feeding.<br />
TP 160 is a disc chipper where the wood is chipped at an angle of 90<br />
degrees. The heart of the machine is the two knives and two anvils. The<br />
chipping is done with great efficiency – and a nice, uniform chip quality.<br />
The new design, increased capacity and improved service makes the TP<br />
160 an attractive wood chipper and shows that even a small machine can<br />
be used for professional use.<br />
TP 160 MobilE is with lombardini motor.<br />
TP 160 TRACK is with lombardini motor.<br />
TP 100 TP 130 TP 160<br />
(1) (2)<br />
Standard on TP 160<br />
• Integrated hydraulic system<br />
• Two knives<br />
• Two anvils in Raex 400<br />
• Two hydraulically powered feed rollers<br />
• Powerful tension spring on moving rollers<br />
• Rotating ejector spout<br />
• Wipers to ensure against accumulation of material in<br />
feed rollers and rotor housing<br />
• Hydraulic adjustment of the roller speed and thereby the chip size<br />
• Rotor lock for securing the rotor disc when changing knives<br />
• Operating bar start/stop/reversing of the feed rollers<br />
• PTO shaft for TP 160 PTO<br />
• Stress control system, TP PILOT – for TP 160 MOBILE<br />
and TP 160 TRACK<br />
PARK Model Knives Chip size Capacity* PTO Weight Fuel<br />
Variants HxW mm Number mm m³/time kW(hp) RPM kg Type Use/h* Tank ltr.<br />
Tractor TP 160 PTO<br />
On trailer 80 km/h,<br />
35 hp, Lombardini motor<br />
On tracks<br />
35 hp, Lombardini motor<br />
* Experience numbers<br />
5-12 22-59 (30-80) 540 555<br />
TP 160 MOBILE<br />
160 x 220 2 4-10<br />
5-10 780<br />
3<br />
Diesel<br />
TP 160 TRACK 5-10 1050 4<br />
TP 200 TP 250 TP 230 TP 270 TP 280 TP 400<br />
20<br />
(3)<br />
(1): TP 160 PTO · (2): TP 160 MOBILE • (3): TP 160 TRACK<br />
PA R K<br />
9
1 0<br />
(1)<br />
(2) (3)<br />
TP 200<br />
The TP 200 is the best selling TP model. Functionality and flexibility have<br />
been crucial factors for many buyers. The TP 200 is a disc chipper with<br />
hydraulic feed, three knives and three anvils. Simple, flexible and effective<br />
for wood chipping of branches and entire trees up to 200 mm in diameter.<br />
The wood is carried by two hydraulically powered feed rollers and cut at<br />
an angle of 90 degrees. Required power from 40 to 115 hp.<br />
TP 100 TP 130 TP 160<br />
PA R K<br />
(1) TP 200 PTO • (2) TP 200 MOBILE • (3) TP 200 MOBILE GB<br />
Standard on TP 200<br />
• Integrated hydraulic system<br />
• Three knives<br />
• Three anvils in Raex 400<br />
• Two hydraulically powered feed rollers which ensure<br />
a powerful feeding<br />
• Powerful tension spring on moving rollers<br />
• Rotating ejector spout<br />
• Wipers to ensure against accumulation of material<br />
at feed rollers and rotor housing<br />
• Changeable casing in rotor housing<br />
• Hydraulic adjustment of the roller speed and thereby<br />
the chip size<br />
• Rotor lock for securing the rotor disc when changing knives<br />
• Operating bar start/stop/reversing of the feed rollers<br />
• Danfoss Hydraulic motors<br />
• PTO shaft for TP 200 PTO<br />
• Stress controle system – TP PILOT on TP 200 MOBILE<br />
TP 200 TP 250 TP 230 TP 270 TP 280 TP 400
PARK Model Knives Chip size Capacity PTO Weight Fuel<br />
Variants HxW mm Number mm m³/hour kW(hp) RPM kg Type Use/h* Tank ltr.<br />
Tractor TP 200 PTO<br />
On trailer 80 km/h, 52 hp TP 200 MOBILE 210 X 265 3 4-10<br />
6-12 1350<br />
On trailer with Turntable,<br />
80 km/h, 52 hp<br />
TP 200<br />
MOBILE TURNTABLE<br />
TP 100 TP 130 TP 160<br />
(1) TP 200 MOBILE TuRnTABLE • (2) TP 200 MOBILE TuRnTABLE<br />
6-18<br />
30-85<br />
(40-115)<br />
TP 200 TP 250 TP 230 TP 270 TP 280 TP 400<br />
700<br />
Diesel<br />
6-12 1550 4<br />
4<br />
47<br />
PA R K<br />
(1)<br />
(2)<br />
1 1
1 2<br />
(1)<br />
(2) (3)<br />
TP 250<br />
If you want large capacity, flexibility and a uniform chip quality from your<br />
wood chipper then TP 250 is the answer. TP 250 is a disc chipper with<br />
hydraulic feed. It is effective for cleaning up and chipping branches with<br />
a width of up to 250 mm in diameter. The large rotor disc with three knives<br />
combined with three anvils, a 90 degree cutting angle and two horizontal<br />
feed rollers ensure a very effective chipping of everything from<br />
thin branches to entire trees. Required power from 60 to 140 hp.<br />
Standard on TP 250<br />
• Integrated hydraulics system<br />
• Three knives<br />
• Three anvils in Raex 400<br />
• Two hydraulically powered feed rollers which ensure<br />
a powerful feeding<br />
• Powerful tension spring on moving rollers<br />
TP 100 TP 130 TP 160<br />
(1) TP 250 PTO • (2) TP 250 PTO K • (3) TP 250 MOBILE TuRnTABLE<br />
• Rotating ejector spout<br />
• Wipers to ensure against accumulation of material<br />
at feed rollers and rotor housing<br />
• Hydraulic adjustment of the roller speed and thereby<br />
the chip size<br />
• Changeable casing in rotor housing<br />
• Rotor lock for securing the rotor disc when changing knives<br />
• Operating bar start/stop/reversing of the feed rollers<br />
• Danfoss Hydraulic motors<br />
• PTO shaft for TP 250 PTO and TP 250 PTO K<br />
• TP PILOT on MOBIL TURNTABLE<br />
• Stress control system – TP PILOT K – on TP 250 PTO K<br />
• Split rotor housing on TP 250 PTO K<br />
PARK Model Knives Chip Size Capacity PTO Weight Fuel<br />
Variants HxB mm Number mm m³/hour kW(hp) RPM kg Type Use/h* Tank ltr.<br />
Tractor TP 250 PTO<br />
Tractor and crane TP 250 PTO K 260 x 350 3 4-13<br />
10-25 1030<br />
On trailer with<br />
TURNTABLE 80 km/h<br />
PA R K<br />
TP 250<br />
MOBILE TURNTABLE<br />
10-25<br />
45-104<br />
(60-140)<br />
540/1000 1065<br />
10-20 2250 Diesel 5 60<br />
TP 200 TP 250 TP 230 TP 270 TP 280 TP 400
TP 230<br />
A strong wood chipper – with trailer coupling - for chipping wood of<br />
up to 230 mm in diameter. A disc chipper with hydraulic feed and the<br />
funnel 90 degrees to the side. The vertical feed rollers and the cutting<br />
angle of 45 degrees ensure an aggressive and problem free chipping<br />
of even the most crooked trunks. TP 230 is the obvious wood chipper<br />
when you want to collect the chips in a trailer.<br />
At the same time, the perpendicular chipper gives great advantages<br />
when the material to be chipped is placed alongside a road. Required<br />
power from 50 to 120 hp.<br />
TP GREENLINE<br />
An integrated solution consisting of wood chipper and high tip dumper<br />
where the wood chipper is mounted on the hitch of the dumper.<br />
TP WINCH<br />
Efficient and easy solution when large and heavy material has to be<br />
transported from the forest to the wood chipper.<br />
PARK Model Knives Chip Size<br />
mm<br />
TP 100 TP 130 TP 160<br />
Cuttingangle<br />
(2) (1)<br />
(4)<br />
(1) TP 230 PTO • (2) TP 230 PTO • (3) TP GREEnLInE • (4) TP 230 PTO w. WInCh<br />
Standard on TP 230<br />
• Integrated hydraulics system<br />
• Three knives<br />
• Three sliver breakers type A<br />
• Two anvils in Hardox 400<br />
• Two hydraulically powered feed rollers which ensure<br />
a powerful feeding<br />
• Two Powerful tension springs on moving roller<br />
• Rotating ejector spout<br />
• Wipers to ensure against accumulation of material<br />
in the rotor housing<br />
• Changeable casing in rotor housing<br />
• Hydraulic adjustment of the roller speed<br />
• Rotor lock for securing the rotor disc when changing knives<br />
• Trailer hitch<br />
• Danfoss Hydraulic motors<br />
Capacity PTO Integrated<br />
drive<br />
Varianter HxB mm Antal m³/time kW(hk) RPM kg<br />
Tractor TP 230 PTO 230 X 240 3 12-19 45 10-30 37-90 (50-120) 540/1000 X 990<br />
Weight<br />
TP 200 TP 250 TP 230 TP 270 TP 280 TP 400<br />
F O R E S T<br />
(3)<br />
1 3
1 4<br />
(1)<br />
(2) (3)<br />
TP 270<br />
Disc chipper with hydraulic feed and the feedhopper at a 45 degree<br />
angle. A forceful and effective wood chipper for chipping wood of up to<br />
270 mm in diameter. The vertical feed rollers and the cutting angle of 45<br />
degrees gives a large capacity and aggressive feeding of even entire trees.<br />
TP 270 is available with either manual operation or operation with crane.<br />
Required power from 100 to 200 hp.<br />
TP 270 with manual operation is also equipped with a rotating 3-point<br />
suspension so the wood chipper can be turned (hydraulically) behind the<br />
tractor into the transport position.<br />
TP 270 is also available in a reversed edition (F) so it can be mounted<br />
at the front.<br />
TP 270 is an obvious choice if you want large capacity and if coupling to<br />
a trailer is required.<br />
TP WINCH<br />
Efficient and easy solution when large and heavy material has to be<br />
moved to the wood chipper.<br />
FOREST Model Knives Chips Cutting<br />
angle<br />
TP 100 TP 130 TP 160<br />
F O R E S T<br />
(1) TP 270 PTO • (2) TP 270 PTO K • (3) TP 270 PTO<br />
Standard on TP 270<br />
• Integrated hydraulic system<br />
• Three knives<br />
• Three sliver breakers type A<br />
• Two anvils in Raex 400<br />
• Two hydraulically powered feed rollers which ensure<br />
a powerful feeding<br />
• Hydraulic cylinder for opening of moving rollers<br />
• Rotating ejector spout<br />
• Wipers to ensure against accumulation of material<br />
in the rotor housing<br />
• Changeable casing in rotor housing<br />
• Hydraulic adjustment of the roller speed<br />
• Rotor lock for securing the rotor disc when changing knives<br />
• Trailer hitch<br />
• Danfoss Hydraulic motors<br />
• Stress control system – TP PILOT K – on TP 270 PTO K and<br />
TP 270 PTO FRONT K<br />
• Split rotor housing with hydraulic opening on TP 270 PTO K<br />
Capacity PTO Integrated<br />
drive<br />
Varianter HxW mm Number mm m³/time kW(hp) RPM kg<br />
Tractor<br />
Tractor and crane<br />
Tractor and crane for front<br />
TP 270 PTO<br />
TP 270 PTO K<br />
TP 270 PTO KF<br />
270 X 290 3 12-22 45<br />
Weight<br />
20-40<br />
1385<br />
80-150 (100-200) 540/1000 x<br />
25-50 1345<br />
TP 200 TP 250 TP 230 TP 270 TP 280 TP 400
TP 280<br />
TP 280 is a strong and compact wood chipper that is optimal for professional<br />
forestry. The wood chipper is mounted on the tractor’s 3-point linkage<br />
and a high tip trailer is mounted at the front of the tractor. The long ejector<br />
spout ”blows” the chips over the tractor and directly into the trailer. Required<br />
power from 135 to 200 hp.<br />
To get the full benefit from the TP 280 it is necessary to have a tractor<br />
where the seat can be turned 180 degrees. With the chipper parallel to the<br />
direction of movement the TP 280 is the perfect solution for row felling or<br />
for clear-cutting.<br />
The professional touch to TP 280 is obvious both in the list of standard<br />
equipment, the high capacity of approximately 50 m3 per hour and the<br />
good chip quality. If you want an especially fine chip quality, for example for<br />
use in small stokers, the wood chipper can be equipped with sliver breakers<br />
in order to optimize the quality of the chips.<br />
TP 280 is delivered with Stress Control System type TP PILOT K, where the<br />
user can operate the wood chipper’s feeding system and at the same time<br />
monitor the rpm on the rotor and the feed rollers.<br />
ForeST Model Knives chips cutting<br />
angle<br />
TP 100 TP 130 TP 160<br />
(2)<br />
(1) TP 280 PTO K • (2) Chips from TP 280 PTO K • (3) TP 280 PTO K<br />
Standard on TP 280<br />
• Integrated hydraulic system<br />
• Three knives<br />
• Anvil In Raex 400<br />
• Two hydraulically powered feed rollers which<br />
ensure a powerful feeding<br />
• Hydraulic cylinder for opening of moving rollers<br />
• V-belt drive between PTO and rotor to reduce shock.<br />
• Ejector spout over the tractor<br />
• Wipers to ensure against accumulation of material<br />
in the rotor housing<br />
• Changeable casing in rotor housing<br />
• Automatic adjustment of the roller speed through TP PILOT K<br />
• Rotor lock for securing the rotor disc when changing knives<br />
• Crane support for mounting crane<br />
• Stress Control System TP PILOT K<br />
• Danfoss Hydraulic motor<br />
capacity PTo Integrated<br />
crane column<br />
Variants HxW mm Number mm m³/time kW(hp) RPM kg<br />
Tractor and crane TP 280 PTO K 280 X 300 3 12-23 30 40-75 100-150 (135-200) 1000 X 1600<br />
TP 200 TP 250 TP 230 TP 270 TP 280 TP 400<br />
F o r e S T<br />
(1)<br />
(3)<br />
Weight<br />
1 5
TP 100 TP 130 TP 160<br />
1 6<br />
(1) (1)<br />
(2)<br />
TP 400<br />
TP 400 is the optimum wood chipper for production of chips in commercial<br />
forestry. It has an integrated crane support and funnel parallel<br />
with the driving direction. The wood chipper can either be mounted<br />
on the tractor’s 3-point linkage or attached directly to selected tractor<br />
models. TP 400 is for fast and efficient chipping of wood up to 400 mm<br />
in diameter. Power need from 200-400 hp.<br />
The high professional level of TP 400 is seen both in the list of standard<br />
equipment, the very high capacity of up to 100 m3 an hour and the<br />
good chip quality. If you want an improved chip quality e.g. for use in<br />
small stoker installations the wood chipper can be equipped with sliver<br />
breakers which will make the chips even more uniform.<br />
The service is also important on TP 400 where the screens can easily<br />
be removed just as the split rotor housing can be opened with a hydraulic<br />
pump so there is easy and fast access to the knives<br />
TP 400 is delivered with its own stress control system TP PILOT K where<br />
the operator can operate the wood chipper’s feeding system and at the<br />
same time monitor the rotation of the rotor, the feed rollers and current<br />
temperature of the hydraulic oil.<br />
ForeST Model Knives chips** cutting<br />
angle<br />
F o r e S T<br />
(3)<br />
(1): TP 400 PTO K · (2): TP 400 COMPACT K • (3): TP PILOT K<br />
Standard on TP 400<br />
• Integrated high pressure hydraulic system<br />
• Four knives (two-knife rotor)<br />
• Two anvils in Raexx material<br />
• Two hydraulically powered feed rollers,<br />
which ensure powerful feeding<br />
• Cylinder for opening feed rollers<br />
• V-belt drive between PTO and rotor<br />
• Ejector spout over tractor with covering of Raex material<br />
• Wipers to ensure against material accumulation in rotor housing<br />
• Changeable covering in Raex material in lower rotor housing<br />
(Split rotor housing with hydraulic opening)<br />
(Automatic adjustment of roller speed with TP PILOT K)<br />
• Rotor lock for securing rotor disc when changing knives<br />
• Crane support for mounting of crane<br />
(Stress control system TP PILOT K)<br />
• Hydraulic funnel bottom on TP 400 COMPACT K<br />
• Boost pressure on rollers (+50% pressure)<br />
capacity PTo Integrated<br />
crane column<br />
Variants HxW mm Number mm m³/time kW(hp) RPM kg<br />
Tractor and crane TP 400 PTO K 400 x 440 4 20-40 30 50-150 147-294 (200-400) 1000 X 3000<br />
TP 400<br />
Tractor and crane<br />
COMPACT K<br />
** In hardwood max. 25 mm<br />
Weight<br />
400 x 440 4 20-40 30 50-150 147-294 (200-400) 1000 X 3000<br />
TP 200 TP 250 TP 230 TP 270 TP 280 TP 400
Accessories for TP Wood chippers<br />
MODEL TP 100 TP 130 TP 160 TP 200<br />
Type PTo PTo MoBILe PTo MoBILe TrAcK PTo MoBILe<br />
Stress control - TP PILoT/TP PILoT K (1) X S X S S X S<br />
Trailer coupling (2) X X<br />
Speed-up gear 540-1000 rpm (3) S S X<br />
Turning gear X<br />
extended ejector spout , vertical 0,30 m (4) X<br />
extended ejector spout , vertical 0,35 m (5) X X<br />
extended ejector spout , vertical 0,50 m (6) X X X X X X X<br />
extend. ejector spout, hor. 1,00 m (7) X X X X X<br />
extend. ejector spout, hor. 1,50 m (8) X X X<br />
Hinged ejector spou (9) X X X<br />
Long ejector spout, 3,9 m<br />
Short ejector spout with transition<br />
Hydraulic turn for long ejector spout<br />
Sliverbreaker type A, per set (10A) X X X X X X X<br />
Sliverbreaker type B, per set (10B) X X<br />
Tool set X X X X X X X<br />
crane support for 3-point suspension (11)<br />
Lock for trailer (12) X X X<br />
TP WINcH (13)<br />
Mowi 300 crane (14)<br />
Mowi 400 crane (15)<br />
Mowi 400 crane vertical<br />
Magnetic Lightbar X X X X<br />
one-hand joystick (16)<br />
Two-hand joystick (17)<br />
S = Standard<br />
T P A c c e S S o r I e S<br />
17
0 TP 250 TP 230 TP 270 TP 280 TP 400<br />
MoBILe<br />
TUrNTAB.<br />
PTo<br />
MoBIL<br />
TUrNTAB.<br />
PTo K PTo<br />
PTo<br />
(FroNT)<br />
PTo K<br />
(FroNT)<br />
PTo K PTo K<br />
S X S S X X S S S S<br />
X<br />
X<br />
X X X X X X X<br />
X X X X X X X X<br />
X X X X X<br />
X X S S<br />
coMPAcT<br />
K<br />
X X<br />
X X X X X<br />
X X X X X<br />
X X X X S S S X X X<br />
X X X X X X X<br />
X X X X X X X X X X<br />
X X<br />
X X<br />
X X X<br />
X X X<br />
X X X X<br />
X X X X X X X X<br />
X X X X X<br />
X X X X X<br />
T P A c c e S S o r I e S<br />
X<br />
1 8
Accessories<br />
(1)<br />
(5)<br />
(9)<br />
(13)<br />
(17)<br />
1 9 L I N D D A N A A · S<br />
(2)<br />
(6)<br />
(10a)<br />
(14)<br />
(10b)<br />
(3)<br />
(7)<br />
(11)<br />
(15)<br />
(4)<br />
(8)<br />
(12)<br />
(16)
WooD cHIPPer<br />
For garden, park and forest<br />
Linddana A/S<br />
Ølholm Bygade 70 · DK-7160 Tørring<br />
Tlf +45 75 80 52 00 · Fax +45 75 80 54 11<br />
e-mail tp@linddana.dk · www.tp.dk<br />
Importer:<br />
Dealer:<br />
Printet in Denmark by Rosendahls (UK) The brochure is subject to alteration.