Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
E)<br />
Prepare a strip of <strong>IC</strong> / IN <strong>CLAD</strong> sheet of the size of the circumference of the entire valve, plus 5<br />
cm of excess for the overlapping of the joining edges and an indentation on the upper part.<br />
Apply the sheet around the whole valve and glue the joints with K 420 adhesive.e1).<br />
Abundance<br />
Glue the indentation and bend it onto the flange fixing it with K 420 adhesive (e2).<br />
F)<br />
Prepare a second ring with an internal indentation and an opening cut to allow for positioning (f1).<br />
Place the ring against the upper flange disk in a way that the internal indentation opens up on the<br />
unfinished pipe f2). Glue the joints with K 420 adhesive f3).<br />
f1<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - FLANGE<br />
Flange finishing placed on vertical piping<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
E<br />
e2<br />
e1<br />
f2<br />
F<br />
f3<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - FLANGES 09<br />
5
Change language