Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Finishing of adjacent tubes<br />
• Prepare two sheet sections a) and b) of a corresponding length to the<br />
surface of the adjacent insulated parts, including the necessary excess of<br />
5 cm for the overlap and cut out the indentation on the side in contact<br />
with the flange.<br />
• Wrap the sections to the insulated tubes resting the indentation against<br />
the flange disks, in order to obtain perfect adhesion.<br />
• With K 420 adhesive, glue the longitudinal overlap and the indentation<br />
in contact with the flange, against water.<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - FLANGE<br />
Flange finishing placed on horizontal piping<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
a b<br />
Abundance<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - FLANGES 04<br />
5
Change language