Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
H) Remove the protective silicone paper<br />
of the top overlappings and close them to the<br />
tops of the tubes.<br />
It is advisable to carry out the operation in<br />
three successive stages (E1, E2, E3) to facilitate<br />
the respective fixing.<br />
I) The procedure is the same if “V” cuts were made<br />
in the overlappings to help adhesion to the top of<br />
the respective tube.<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - “T-piece”<br />
Installation of pre-shaped “T-piece” with <strong>IC</strong> <strong>CLAD</strong> finishing<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
E3<br />
E1<br />
E2<br />
H<br />
I<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - “T-piece” 14<br />
4
Change language