Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
INSTALLATION<br />
C) Glue the the tops of the tubes with K 420 adhesive.<br />
D) Glue the elastomeric tops of the “T-piece”.<br />
E) Place the K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> “T-piece”<br />
placing the top overlappings of the “T-piece”<br />
to the 3 tops of the tubes already installed.<br />
Close the elastomeric tops of the “T-piece” with those of<br />
the tubes.<br />
D<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - “T-piece”<br />
Installation of pre-shaped “T-pieces” with <strong>IC</strong> <strong>CLAD</strong> finishing<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
C<br />
E<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - “T-piece” 12<br />
4