Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The pre-shaped and pre-cut “T-pieces”, have the <strong>IC</strong> <strong>CLAD</strong> finishing sheet already applied.<br />
They also have a longitudinal cut with an overlap for fixing the finishing.<br />
They also include an overlap for fixing on the heads.<br />
INSTALLATION<br />
A) Install the 3 adjacent tubes, leaving sufficient space to<br />
facilitate placing the “T-piece”.<br />
B) If you wish to make “V” cuts in the finishing of the head<br />
overlappings, to facilitate adhesion with the heads of the<br />
tubes, the operation should be carried out before installing<br />
the “T-piece” and even before applying the adhesive on the<br />
elastomeric parts.<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - “T-piece”<br />
Installation of “T-piece” with <strong>IC</strong> <strong>CLAD</strong> finishing<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
A<br />
B<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - “T-piece” 11<br />
4
Change language