Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
A<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - “T-piece”<br />
“T-piece” finishing with the connection placed under the tube<br />
A) On a section of specific K-<strong>FLEX</strong> <strong>IC</strong> / IN <strong>CLAD</strong> sheet a),equivalent of the surface of the insulated pipe plus an overlap abundance,<br />
trace the shape of the connection and cut out the shape along the plan.<br />
B) Install the shape around the joint of the connecting piping, overlapping it on the previously placed indentation.<br />
Fix the logitudinal edges of the sheet b) glueing the overlap with K 420 adhesive.<br />
abundance<br />
circumference of tube<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
B<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - “T-piece” 09<br />
4