Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
A B<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - “T-piece”<br />
“T-piece” finishing with the connection placed over the tube<br />
A) With the appropriate template, trace on a section of K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> sheet, the shape correspoding to the surface of the connection,<br />
plus an abundance of at least 5 cm for the overlap.Along the curves, form the indentation.<br />
B) Cut out the shape along the plan.<br />
B) Place the shape around the connection of the piping.The perforation should open up on the connection.<br />
Fix the longitudinal edges of the sheet, glueing the overlap with K 420 adhesive.<br />
With the same adhesive also glue the indetation around the connection.<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
C<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - “T-piece” 08<br />
4
Change language