Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - “T-piece”<br />
“T-piece” finishing with the connection placed over the tube<br />
- type no. 2, with front joint template.<br />
A) With the appropriate template, trace the shape of the conection on a section of specific K-<strong>FLEX</strong> <strong>IC</strong> / IN <strong>CLAD</strong> sheet<br />
leaving an excess of a least 5 cm for the overlap..<br />
B) Cut out the shape along the plan.<br />
C) Place the shape around the outline of the connecting piping.<br />
Fix the longitudinal edges of the sheet, glueing the overlap with K 420 adhesive.<br />
A B C<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - “T-piece” 07<br />
4
Change language