Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - “T-piece”<br />
“T-piece” finishing with the connection placed over the tube<br />
A) From a section of K-<strong>FLEX</strong> <strong>IC</strong> / IN <strong>CLAD</strong> sheet, cut out the equivalent of the surface of the insulated pipe plus an abundance for the overlap.<br />
Corresponding to the connection, form half an indented hole in a circular shape the same as that of the insulated tube.<br />
B) Place the shape around the connecting piping.The indentation should open up on the connecting “T-piece”.<br />
Seal the logitudinal edges of the sheet glueing the excess with K 420 adhesive.<br />
With the same adhesive also glue the indentation on the connecting tube.<br />
abbundance<br />
circumference of the tube<br />
A B<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - “T-piece” 05<br />
4
Change language