Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - “T-piece”<br />
insulation and finishing<br />
L’ISOLANTE K-<strong>FLEX</strong> offers the possibility to purchase the pre-cut K-<strong>FLEX</strong><br />
“T-pieces”, according to the required diameter and thickness<br />
The pre-cut K-<strong>FLEX</strong> “T-piece” offer undeniable benefits for the work of the installer:<br />
• EASIER OPERATIONS<br />
• MORE ACCURATE AND SATISFACTORY EXECUTION<br />
• CLEANER WORK AND REDUCED WASTE<br />
• TIME AND LABOUR COSTS SAVINGS<br />
For the application procedures of<br />
K-<strong>FLEX</strong> insulating elbows<br />
prepared by the installer with<br />
sheet sections, see the relevant<br />
sections of the K-<strong>FLEX</strong><br />
APPL<strong>IC</strong>ATION GUIDE<br />
<strong>Application</strong> guide<br />
If you are not in possesion of a printed<br />
guide you can ask for it at our<br />
technical office or download the pdf<br />
file from our website<br />
www.kflex.com<br />
All the operations described can be carried out with<br />
the selected insulation material: K-<strong>FLEX</strong> ST or K-<strong>FLEX</strong> ECO<br />
In the application sequence, the <strong>IC</strong> <strong>CLAD</strong> SR (Silver) is<br />
represented.<br />
The indications are also the same for the use of the<br />
<strong>IC</strong> <strong>CLAD</strong> BK (Black) finishing.<br />
“T” K 90 K-<strong>FLEX</strong> ST / ECO<br />
The K-<strong>FLEX</strong> K 90 pre-cut<br />
“T-piece” connections<br />
are shaped by mechanical<br />
methods on computerized<br />
diagrams and thier precision<br />
allows for perfect installation.<br />
The K-<strong>FLEX</strong> IN <strong>CLAD</strong> finishing of the elastomeric “T-pieces”<br />
should be prepared by the installer with the specific sheet in<br />
polimeric fiber.<br />
The procedure is illustrated in this section.<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> APPL<strong>IC</strong>ATION GUIDE<br />
KEY OF RECURRING GRAPH<strong>IC</strong> SYMBOLS<br />
Joints glued with K 420 adhesive<br />
Edges sealed with marine silicone<br />
Direction of movement with arrow:<br />
to indicate the action carried out during<br />
the application of the insulation or of<br />
the finishing<br />
Measurements to be taken<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - “T-piece” 03<br />
4