Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - ELBOWS<br />
Installation of pre-shaped<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> SR / BK elbows<br />
The <strong>IC</strong> <strong>CLAD</strong> pre-shaped elbows have the <strong>IC</strong> <strong>CLAD</strong> finishing sheet applied in sections.<br />
They are all cut on the underside with an abundance for the overlapping of the finishing sheet.<br />
They also have an overlap for the closure on the heads.<br />
INSTALLATION:<br />
A-B) After having laid the tubes, install the pre-cut <strong>IC</strong> <strong>CLAD</strong> elbow.<br />
C) Glue the elastomer edges with K 420 adhesive.<br />
D) Close the elastomer edges.<br />
A B D<br />
C<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - ELBOWS 10<br />
3
Change language