Application Manual K-FLEX IC-CLAD 1109.pdf

For the application procedures of
K-FLEX insulating elbows
prepared by the installer with
sheet sections, see the relevant
sections of the K-FLEX
APPLICATION GUIDE
Application guide
K-FLEX IC CLAD - ELBOWS
Insulation and finishing
All the operations described can be carried out with
the selected insulation material: K-FLEX ST or K-FLEX ECO
L’ISOLANTE K-FLEX allows you to purchase the K-FLEX elbows, pre-cut according
to the required diameter and thickness
The K-FLEX pre-cut elbows offer undeniable benefits for the work of the installer:
• EASIER OPERATIONS
• MORE ACCURATE AND SATISFACTORY EXECUTION
• CLEANER WORK AND REDUCED WASTE
• TIME AND LABOUR COSTS SAVINGS
If you are not in possesion of a
printed guide you can ask for it at our
technical office or download the pdf
file from our website
www.kflex.com
Ther K-FLEX K 90 pre-cut elbows are
shaped by mechanical methods on
computerized diagrams and thier
precision allows for perfect installation.
The K-FLEX IC CLAD finishing of the
insulation elbows shoud be prepared
by the installer with the specific IC
CLAD SR / BK sheet.
The procedure is illustrated in this
section.
In the application sequence, the IC CLAD SR (Silver) finishing is
represented.
The indications are also the same for the use of the
IC CLAD BK (Black) finishing.
K-FLEX IC CLAD APPLICATION GUIDE
KEY OF RECURRING GRAPHIC SYMBOLS
Joints glued with K 420 adhesive
Edges sealed with marine silicone
Direction of movement with arrow:
to indicate the action carried out during
the application of the insulation or of
the finishing
measurements to be taken
K 90 ELBOWS
K-FLEX ST / ECO
IC CLAD Application guide 04/04 - Engl.
IC CLAD - ELBOWS 03
3