Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Laying of tube II<br />
B<br />
C<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - TUBE<br />
Use of the K-<strong>FLEX</strong> sheet with <strong>IC</strong> <strong>CLAD</strong> finishing already applied<br />
II<br />
II<br />
A)<br />
Lay tube II in line with tube I.<br />
Glue with K 420 adhesive the edges of the logitudinal joints of the elastomer.<br />
B)<br />
Shut the closure of the elastomer.<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
C)<br />
Glue the elastomeric heads of the two tubes with K 420 adhesive (C1).<br />
With K 420 adhesive, glue the internal walls of the overlap and the head of tube I<br />
(C2) which will be superimposed by the overlap.<br />
C1<br />
C2<br />
I<br />
I<br />
<strong>IC</strong> <strong>CLAD</strong> guida per l’applicazione 03/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - TUBES 15<br />
2
Change language