Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Laying of tube I<br />
A)<br />
Place the prepared sheet on the piping<br />
to check the dimensions.<br />
Turn the closure of the overlap<br />
against water.<br />
B)<br />
Glue the joining edges of the<br />
elastomerico layer with K 420<br />
adhesive.<br />
A)<br />
Join the edges of the elastomer<br />
pressing carefully to obtain an even<br />
closure without stretch marks.<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
K-<strong>FLEX</strong> IN <strong>CLAD</strong> - TUBE<br />
Use of the K-<strong>FLEX</strong> sheet with <strong>IC</strong> <strong>CLAD</strong> finishing already applied<br />
<strong>IC</strong> <strong>CLAD</strong> guida per l’applicazione 03/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - TUBES 12<br />
2