Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
A B<br />
A<br />
Remove the marginal part of the remaining silicone film and close the<br />
adhesive female part onto the male part.<br />
B<br />
Close the end of the overlap strip<br />
to complete the joining between the two tubes.<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - TUBE<br />
Pre-cut tube with SR o BK finishing already applied<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
C1<br />
C<br />
C3<br />
D<br />
C2<br />
C<br />
Fix the joints with the specific <strong>IC</strong> <strong>CLAD</strong> adhesive<br />
tape, of an adequate width (C1-C2-C3).<br />
Turn the joints of the tape (C3) against water.<br />
D<br />
For external applications, seal the visible joints and<br />
edges of the tapes with marine silicone.<br />
<strong>IC</strong> <strong>CLAD</strong> guida per l’applicazione 03/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - TUBES 22<br />
2
Change language