Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
A<br />
With the same procedure illustrated so far, arrange the next tube in line<br />
(II), with the male part turned towards the female part of the first tube (I).<br />
In order to obtain a firmer hold is is advisable not to align the two<br />
longitudinal joints (A1-A2).<br />
B<br />
Apply K 420 adhesive on both the joining ends of the elastomer.<br />
Remove the protective silicone film from the internal<br />
wall of the female overlap(B1).<br />
tubo II<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - TUBE<br />
Pre-cut tube with SR o BK finishing already applied<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
A1<br />
A<br />
B<br />
B1<br />
A2<br />
C<br />
tubo I<br />
C1<br />
C<br />
Push the tube II in the overlap of the tube’s head<br />
I facilitating entry by loosening the parts that have<br />
not already been fixed (C1).<br />
<strong>IC</strong> <strong>CLAD</strong> guida per l’applicazione 03/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - TUBES 21<br />
2