Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
A<br />
Remove the protective silicone film<br />
of the overlap (A1),<br />
except for the last centimeters<br />
corresponding with the protruding side<br />
of the overlap on the head (A2).<br />
B<br />
Close the longitudinal overlap strip,<br />
except for the last part that has kept the<br />
protection.<br />
This trick will reveal itself useful for helping<br />
insertion of the next tube in line.<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - TUBE<br />
Pre-cut tube with SR o BK finishing already applied<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
A2<br />
A<br />
B<br />
A1<br />
<strong>IC</strong> <strong>CLAD</strong> guida per l’applicazione 03/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - TUBES 20<br />
2