Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
A)<br />
Fix the longitudinal joints with the specific <strong>IC</strong> <strong>CLAD</strong> adhesive tape.<br />
B)<br />
Apply the specific <strong>IC</strong> <strong>CLAD</strong> adhesive tape around the head joints of the two tubes.<br />
Turn the overlap of the tape against water.<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - TUBE<br />
Use of the K-<strong>FLEX</strong> sheet with <strong>IC</strong> <strong>CLAD</strong> finishing already applied<br />
A B<br />
In the application sequence, the <strong>IC</strong> <strong>CLAD</strong> SR (Silver) finishing is represented.<br />
The indications are also the same for the use of the <strong>IC</strong> <strong>CLAD</strong> BK (Black) finishing.<br />
C)<br />
For external applications, if necessary, seal all the visible joints of the finishing and the edges of the tapes with marine silicone.<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
C<br />
<strong>IC</strong> <strong>CLAD</strong> guida per l’applicazione 03/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - TUBES 18<br />
2