Application Manual K-FLEX IC-CLAD 1109.pdf

Laying of tube II
Push tube II against tube I (A1), until the heads of the
elastomer which must firmly adhere, touch.
It may be useful to make cuts in the overlap to facilitate
the insertion of tube I (A2).
Fix the ends of tube I to the walls of the female overlap
of tube II.
K-FLEX IC CLAD - TUBE
Use of the K-FLEX sheet with IC CLAD finishing already applied
A1
II I
KEY: K 420 adhesive Marine silicone Measurements Actions
A2
II I
IC CLAD guida per l’applicazione 03/04 - Engl.
IC CLAD - TUBES 16
2