Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Laying of the <strong>IC</strong> <strong>CLAD</strong> SR / BK standard finishing sheet<br />
A<br />
Circumference of the insulation<br />
+5 cm<br />
Length of the insulation tube<br />
B)<br />
Place the sheet on the piping arranging the<br />
longitudinal joints against water.<br />
C)<br />
Glue the joining edges with K 420 adhesive.<br />
D)<br />
Close the joints.<br />
Fix the edges with the specific <strong>IC</strong> <strong>CLAD</strong> adhesive tape.<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - TUBE<br />
<strong>Application</strong> of the <strong>IC</strong> <strong>CLAD</strong> SR / BK finishing sheet<br />
on tube insulated with K-<strong>FLEX</strong> elastomer<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
A)<br />
Cut from an <strong>IC</strong> <strong>CLAD</strong> sheet a section of a height corresponding to the circumference of the insulation tube<br />
plus 5 cm of abundance for the overlap, and of the length of the insulation section to cover.<br />
B<br />
C<br />
D<br />
<strong>IC</strong> <strong>CLAD</strong> guida per l’applicazione 03/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - TUBES 06<br />
2