Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Covering of the tank’s wall<br />
Before applying the K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> sheets it is advisable to<br />
carefully clean the surface of traces of dirt, grease and oil to allow<br />
for proper adhesion.<br />
Place the sheet sections in a circular fashion (a) starting from the<br />
bottom and working towards the top (b).<br />
Vary the arrangement of the vertical joints for greater<br />
absorption of the expansion of the insulation.<br />
Apply the next ring of sheets only when the previous one<br />
is perfectly aligned and glued.<br />
At the top of the wall, a special operation is needed<br />
for the connection with the roof of the tank, which we will come to<br />
further on, when we have defined the application method for the sections<br />
placed onto the wall.<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - LARGE TANKS<br />
Insulation and finishing with K-<strong>FLEX</strong> elastomeric sheet<br />
covered with <strong>IC</strong> <strong>CLAD</strong> sheet.<br />
KEY: K420 adhesive Marine silicone Measurements Actions<br />
b<br />
a<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - LARGE TANKS 13<br />
9
Change language