Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
For the outer sheet sections it is necessary to protect also the the thickness of the curved side<br />
with <strong>IC</strong> <strong>CLAD</strong> finishing, turned towards the outside.<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - LARGE TANKS<br />
Finishing with <strong>IC</strong> <strong>CLAD</strong> sheet<br />
To allow the flow of the water out of the perimetrical edge, an extra abundance must be created<br />
(a) including the thickness of the K-<strong>FLEX</strong> sheet plus an extra 5/10 cm needed for an adequate<br />
overlapping of the sheet to the wall below (b).<br />
If necessary, make a cut in the overlap (c) to absorb the tension of the curvature. Glue the overlap<br />
with K 420 adhesive and fix the joints with the specific <strong>IC</strong> <strong>CLAD</strong> adhesive tape.<br />
a<br />
c<br />
c<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
b<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - LARGE TANKS<br />
9<br />
09
Change language