Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1<br />
2<br />
• From a <strong>IC</strong> <strong>CLAD</strong> sheet cut out the covering sections of the tank’s wall,with the<br />
appropriate abundance for overlaying the joints and the openings for the accessory<br />
parts already insulated.<br />
• Apply the sections around the wall re-covering the indentation of the finishing of<br />
the accessory parts.<br />
Glue the edges and the overlappings with K 420 adhesive.<br />
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - SMALL AND MEDIUM TANKS<br />
Finishing with sections of <strong>IC</strong> <strong>CLAD</strong> sheet<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
1<br />
2<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - SMALL AND MEDIUM TANKS 08<br />
8
Change language