Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - VALVES<br />
Finishing of valve with valve box facing upwards<br />
1) Take the measurements indicated and cut out, from a section of <strong>IC</strong> <strong>CLAD</strong> sheet, the covering for the valve’s body.<br />
Shape an indentation on the inside of the hole and leave an abundance for the overlapping of the longitudinal joints.<br />
Make an opening cut to place the shape around the stuffing box (c).<br />
abbondanza<br />
b<br />
1 2<br />
a<br />
a<br />
e e<br />
e e<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
c<br />
b<br />
2) Apply the shape onto the valve’s body<br />
turning the joining overlap against water (d).<br />
Fold the indentation onto the stuffing box (e).<br />
Fix the joints and the indentation with K 420<br />
adhesive.<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - VALVES 19<br />
6