Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - VALVES<br />
Finishing of valve with valve box facing upwards<br />
1) Measure the indicated diameters (a-b) and cut out two rings for covering the flanges of the valve’s body, with external indentation and an opening cut (c).<br />
2) Fit the rings in, one on each side in contact with the valve’s boby flanges.<br />
3) Fold the indentations onto the body of the valve (d). Fix the indentations and the joining edges with K 420 adhesive.<br />
1 2 3<br />
a<br />
b<br />
c<br />
b<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
a<br />
d<br />
d<br />
d<br />
d<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - VALVES 18<br />
6