Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - VALVES<br />
Valve finishing with valve box facing downwards<br />
1) Measure the diameters indicated (a-b ) and cut out the two covering rings of the flange of the valve’s body, with external indentation and an opening cut (c).<br />
2) Place the rings, one on each side (d).<br />
3) Fold the indentation onto the valve’s body (e). Fix the two rings and the respective indentation with K 420 adhesive.<br />
1 2 3<br />
a<br />
b<br />
c<br />
b a<br />
d d<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
e<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - VALVES 12<br />
6
Change language