Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Application Manual K-FLEX IC-CLAD 1109.pdf
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
K-<strong>FLEX</strong> <strong>IC</strong> <strong>CLAD</strong> - VALVES<br />
Valve finishing with valve box facing downwards<br />
1) Cut out two sections of <strong>IC</strong> <strong>CLAD</strong> sheet (I-II) of a length coresponding to the circumference of the straight insulated pipes (a).<br />
Make the indentation along the side that will be placed on the valve, with an abundance of 5 cm for the overlapping<br />
of the longitudinal joints.<br />
2) Apply the sections on the repective pipe with the indentation folded onto the external flange disks of the valve’s body (b).<br />
The longitudinal joints, turned against water (c), and the indentations should be fixed with K 420 adhesive.<br />
circonferenza del tubo<br />
a<br />
abbondanza<br />
I<br />
1<br />
II<br />
abbondanza<br />
b b<br />
b b<br />
b<br />
c c<br />
b b<br />
KEY: K 420 adhesive Marine silicone Measurements Actions<br />
I<br />
2<br />
b<br />
II<br />
a<br />
<strong>IC</strong> <strong>CLAD</strong> <strong>Application</strong> guide 04/04 - Engl.<br />
<strong>IC</strong> <strong>CLAD</strong> - VALVES 11<br />
6
Change language